Simple waste oil burner 1
Loading...
Loading...
46,297
Loading...
Uploader Comments (richiewrench)
see all
All Comments (17)
-
i use one of these for hash oil nice vid and thumbs up bro
-
i used a fart fan from a bathroom it works well
-
Hi take a look at my homemade waste oil burner it is easy to fire.
youtube.com/watch?v=2bKNpb6-FO
U this is prototyp 1 and it have some smoke but i have made prototyp 3 now and it is very clean.
-
very nice
-
the breale drum is not secureed to the stove is it can the drum tip over
jim
Loading...
1:45
Simple waste oil burner 3by richiewrench35,104 views- 1:05
Simple waste oil burner 2by richiewrench68,008 views
- 2:06
Home made simple waste oil burnerby silabanpolres30,159 views
- 0:48
New Homemade Foundry Torchby RB1324057,399 views
- 0:46
waste oil burner(free heat)by eakles21,016 views
- 1:49
Waste oil burner heaterby wiatroda115,300 views
- 12:50
My Burner Assembly and how it was made.wmvby TheMrTinker31,270 views
- 1:40
Inductive Heatingby pupitopitorro588,229 views
- 0:06
Special Talentby NerdOnTheNet5,326,514 views
- 12 videospalniki
- 1:46
Burner for waste engine oilby LightningAlan88,279 views
- 1:03
Drip Feed Waste Oil Heater, Emissionsby ozzirt60,161 views
- 0:23
Wast Oil-Heaterby customrd137,792 views
- 1:10
home made waste oil burner heaterby porschestyling25,477 views
- 10:00
Free Heat for your Homeby Prince7641302,550 views
- 5:45
Anatomy Of Oil Burner Service: The Basicsby MagicPatrick165,563 views
- 1:11
Waste Oil Heater - Completeby txpilot8225,654 views
- 6:06
General Waste Oil Burner Problems (Part 1)by ClaveBurners27,787 views
- 0:46
Mother Earth News waste oil heaterby yonmoore23,667 views
- 2:51
Homemade Waste Oil Burnerby bratkid6394,964 views
- 1:48
Drip Feed Waste Oil Heaterby jahzoone76,203 views
Well I got my re stat idea from you!!! I have been wanting to get a fan like you got but where do I get one like that? The fan that I'm using is one that I found and made it work.
H2OPeruvianFarmer 10 months ago
@H2OPeruvianFarmer I got my fan off of Ebay, but haven't been able to find anymore just like it. Don't know where your located, but Surplus Center has a good selection of fans. They are in Lincoln Nebraska. If you don't mind spending a bit more money, a draft inducer fan from a new high efficiency furnace would be the best. This year my reohstat switch died and I just block off the inlet air to adjust airflow now.
richiewrench 10 months ago
how well would it work on french fry oil?
nekbiodieselworks 11 months ago
@nekbiodieselworks I have never worked with french fry oil, but I'm sure it would burn great.
richiewrench 11 months ago
from the vid, I have no idea how it works. how does oil get into combustion chamber? I know there's a "line", but what keeps the line from getting hot and making a dangerous sit.? What is the oil flow? A quick drip? Is that why you pre-ignite the chamber, so that the oil vaporizes as it hits the pan? What's the purpose of the metal pc under the drum and what you put on top?It seems if it is burning right at the exhaust, most heat goes out a chimney, unless u have a heat exchanger in it.
kenfo0 1 year ago
@kenfo0 The oil gets into the combustion chamber through a 3/8 steel brake line that is routed inside the 2" steel pipe. The air from the fan keeps the brake line cool enough to not coke the oil inside of the brake line. I don't know what a dangerous sit is. The oil is a steady stream about 1/8 " . I don't use the diesel fuel anymore I use a propane torch for about 2 minutes to get the oil burning. The metal piece under drum is just a spacer to bring the airflow closer to the oil.
richiewrench 1 year ago