R-60 controlling R-54 - tuneup procedure

This demonstrates an R-60 MIDI-CV interface tuning itself to control an R-54 set as a VCO.

Those who have problems making an R-60 complete the tuning process could try these suggestions:

1) when setting the initial pitch of the R-54 at the beginning of the tuneup, set the R-54 pitch to below 32 Hz, not precisely at 32 Hz.
2) when tuning is done, press and hold the Learn button, then immediately press the low C key at least 3 times. Then operate the pitch bend while holding the low C key, this clears out the R-60 buffer.
3) if this still does not work, try a hard reset.

Category:

Music

Tags:

• metasonix
• tube
• synth
• vco
• midi