Inside the rebuild project of a green and blue DMX stage laser

This was originally a laserworld RGY laser at 300-500 mw range. When I got it the red lasers nor the galvo control worked. I bypassed the galvo controller and mounted the x,y, galvos directly to the IC, I also ordered a blue laser module with 25 khz TTL modulation and mounted it in along with a 12 volt rail into the laser.. It needs some work but the project is coming together pretty well. It currently runs a 300 mw green laser and a 400 mw blue laser and is capable of running 700 mw in total

Category:

Science & Technology

Tags:

• green
• blue
• DMX
• laserworld
• galvo
• stage
• dj
• light
• show

[Zenodilodon]

@danksmokaz This is a rebuild off a laserworld RGB laser. it is not using the arduino kit. It has DMX 512 and ILDA and audio designs on board, with the galvo driver this si a 20-30 kpps laser with TTL for 2 laser colors. its about 15 kpps without the driver " its currently hot wired to the logic board " you can buy galvo kits off ebay at a decent rate they rance $100-$500 depending on KPPS and how many lasers the board can support. do research on galvo lasers and scanners and TTL modulation.

[danksmokaz]

dude so sick....i have some lasers and some goodies but scanning is the next level! does this have something to do with an OSC circuit and a PLC chip? ive always wanted to boild a digital 15k scann head ! i heard it is possible to make them at slower speed with nice stepper moters...how dod you code the scan ? pic axe? /arduino?