Killer RC's Killer Bee v1 Remote Kill Switch on Baja 5B & 5T

The Killer Bee is now discontinued. The Super Bee has replaced it.
This is Killer RC's Killer Bee v1 Remote Kill Switch on Baja 5b and 5t. Visit www.KillerRC.com This kill switch works with all 3 or 4 channel radios. Futaba, HPI, Nomadio, Spektrum, JR, Airtronics, Ko Propo, and more.

Category:

Entertainment

Tags:

• PB
• pbs
• pb's
• RC
• Car
• HPI
• Baja
• 5B
• Kill
• Switch
• 5t
• FG
• MCD
• Redcat
• Nitro
• Gas
• 1/5
• scale
• Diemaster
• AMS
• Zenoah
• Chung Yung
• gasoline
• petrol
• killer
• bee
• killerbee
• killerrc
• rc
• cen
• matrix5
• kill
• pico
• super
• Savage
• Radio
• Racing
• Electric
• Team
• Remote Control
• Mobile Device
• Cars
• Mini
• Kyosho
• Dune
• losi
• 5ive
• 5b
• 5sc
• eddy
• turtle
• racing
• hbf
• addicts

[marcus730743]

is there a way to have it automatically apply all brake?

[pb2themax]

@marcus730743 No. The kill switch has nothing to do with the servos. Most modern radios have a built-in failsafe in the radio receiver that can make the servo apply brake. You just have to read the radios manual and set the failsafe appropriately.

[pirape]

what happens if the baatery pack gets unplug while the engine servo is at full throttle?

[pb2themax]

@pirape The Kill Switch would loose power and cause the circuit to close, which would ground out the engine spark, which would kill the engine immediately.

[matty008960]

if you had a real HPI 5b v2 they come with killswitchers

[pb2themax]

@matty008960 What are you talking about? This is a real HPI Baja. None of them come with a remote kill switch. They only come with a red push button on the engine. You have to buy a Killer Bee and install it on the car.

[CrazyBoyx199]

The Baja v2 doesn't not come w a fail safe u have to install yourself. If u don't believe then you car goes on its own then u will.

[frddyj1970]

@matty008960 ... you obviously don't own a baja.

sweet products kent

[matty008960]

@pb2themax i think your abit confused about what i said i was not talking to you personaly i was saying, if you had a real 5b v2 that comes with a killswitch that works fine whats the need for this. ?

[KOSTASVALE]

if it does this ,then any signal of failsafe want be able to set the servos in fail safe positions!!please let me know how that works!!thank you!!

[KOSTASVALE]

hi!let me understood the usage of that gadjet!!in the bigging of that vid you said that with that switch you can prevent a throtle servo burn !!this thing works either if we have or not a fail safe,right??if we have fail safe when we closed the trans. with the receiver on the fail safe will put dervo in brake porition!!in this case the kill switch will reset the servo in neuteral position!in other words that thing cut off automatically the power in car?