How To Make a Mini Tripod For Your Camera

Handle any emergency with Howcast's First Aid app - http://howc.st/jkDRTe

Expand the description and view the text of the steps for this how-to video.

Check out Howcast for other do-it-yourself videos from cryptob9 and more videos in the General Photo Techniques category.

You can contribute too! Create your own DIY guide at http://www.howcast.com/videos/new or produce your own Howcast spots with the Howcast Filmmakers Program at http://www.howcast.com/filmmakers/apply.

Turn an old tennis ball into a nifty camera tripod in just minutes. Inspired by an Instructables.com project: http://www.instructables.com/id/SDMK5MWFDO29GEZ/

To complete this How-To you will need:

A tennis ball
A pen
A knife, scissors, razor blade, or saw
A quarter-inch-by-one-inch, 20-thread, nylon machine screw
A drill or hole puncher (optional)

Warning: When wielding a knife, razor blade, saw, or drill, always use extreme caution.

Step 1: Halve the tennis ball

Take an old tennis ball—one that has lost its bounce—and cut it in half with a knife, scissors, razor blade, or saw.

Step 2: Mark out the first foot

Take a pen and, at the bottom edge of one half of the tennis ball, anywhere you like, make a small mark that reaches about half an inch up the side of the ball. Then make another pen mark half an inch away from that. This set of marks represents the first "foot" of your tripod.

Step 3: Mark out the second and third feet

Mark out the second foot by moving one and a half inches away along the edge of the ball and making a mark there and a mark half an inch from that. Repeat this process one more time, making a third set of marks one and a half inches away from the second set.

Step 4: Cut out the feet

Flatten the ball and cut away, in a straight line, the space between the three "feet" you've just created with your pen marks. When you release the ball, you'll have a dome with three feet that are separated by arches.

Step 5: Cut a hole in the top

At the top of the dome, draw a circle about the size of a quarter and cut that out.

Tip: You may also cut out a little square adjacent to the circle to make a keyhole design; this will allow you to tilt the tripod in different directions.

Step 6: Create washers

Take the other half of the tennis ball and cut two circles out of it, each approximately one and a half inches in diameter. Then cut a quarter-inch hole in the dead center of each circle to make two washers.

Tip: If you have a hole puncher or a drill with a quarter-inch bit, use that to make the center holes.

Step 7: Begin assembling the tripod

Take a quarter-inch-by-one-inch, 20-thread, nylon machine screw and hold it so that it points up, with the screw head on the bottom. Now push one of the washers, rounded side up, all the way down the screw until it touches the screw head.

Step 8: Finish assembling the tripod

Next, push the tripod dome down over the washer. Finally, push the second washer, rounded side up, down on top of the dome. The washer, dome, and washer should all fit snugly together.

Step 9: Attach camera

Find the tripod mounting hole that is on the bottom of all cameras, both film and digital, and place it over the screw sticking out of your tennis ball tripod. Voilà! You've got a pocket camera tripod.

Thanks for watching How To Make a Mini Tripod For Your Camera! If you enjoyed this video subscribe to the Howcast YouTube channel! http://www.youtube.com/subscription_center?add_user=howcast

Category:

Science & Technology

Tags:

• arts
• constructing
• film
• HotHowTos
• instructables
• makeshift
• making
• photographing
• photography
• photos
• video

[NilsKills]

because your camera really needs to be raised up 1/3 of an inch up off the ledge.

[mohawkbaby27]

Chuck norris can make a tripod with 1 leg

[alectroniq]

using this method i made tripod out of a potato !!! :D

(stupid video - stupid tripod !)

[becky1291]

it would be cheaper and better to get a tri-pod from the pound-shop

[TheJiggabooooooooooo]

I wanted to build a tripod that was about 3 feet tall to film skating videos but I guess I can't because a tennis ball is about an innch high...

[mortimerr2011]

I guess they really meant "mini"!

[RedWhiteAndBlueVideo]

This Sucks why even cut the tennis ball?

[Residew]

This is a cut up tennis ball with a camera on top, not a tripod.

[lufilafa]

i bet they filmed this on a real tripod :P

[zmeggz]

Thumps up if you could just grab some old books insted of this :L

[spyked1]

when god sees u he shakes his head in shame:(

[ProgressingDownward]

Yes. I can now not only raise my camera half an inch in the air, but now I can only shoot pictures straight and cannot point it upwards or downwards. (: