Solenoid Insert maintenance shocker SFT and NXT

removal and instalaition video

Please thank Ydna for making these videos by visiting his fantabulous(yes I made that up) website www.zdspb.com

Category:

Howto & Style

Tags:

• shocker
• tech
• solenoid
• inserts
• ydna
• zdspb

[balfanater]

@Dextraport The inserts usually go about 9 turns in, there is some variance between shockers but for NXT's its somewhere around 9.

As for the leaks, check the 16/90 bolt sail, the inserts (both o-rings and alignment) all 6 manifold o-rings, they are the most likely cluprits, and of course make sure everything has a nice coat of grease

Balf

[edibleundrpants]

jw how to replace solenoid? and where to buy..?

[balfanater]

Solenoids are a simple switch, just remove the old one, drop the new one in.

You may need to switch teh board over which if you have a parker solenoid may be a bit more time consuming as you have to de-solder the old board and put it on the new solenoid.

Best place to pick one up would be a SP dealer or PBn or a local forum to you

[deimossec8]

hello, I already could to remove the left insert, and I already have the new left insert, but I would like to know for what serve the filter??? thanks

[balfanater]

the filter is just that, it filters any junk out of the air, most places have clean air now but back in the day and with CO2 it's wasn't always clean so the filter had a purpose

[DIRTYCHEESE]

hey man i just wanted to put a thank you out there for your patience you indeed are very patient.deimosse can not speak very good english because he is mexican but you continue to reply very respectful. balfanater I LOVE YOU!!!!i am getting the new purple nxt that came out. now they come with a q lock and a great board i have wanted a shocker for a very long time but have been very careful because of all this sp hate. but i found you have to take things like a grain of salt in the internet.reply

[balfanater]

It's much appreciated, I try to do what I can.

As long as it's written in vague English I can read it.

The SP hate is mainly aimed at the company rather than the products I've found.

As I said thanks are muchly appreciated.

Keep on balling

Balf

[Dextraport]

Hello all good. I'm having trouble with my nxt shocker. First there is a large leak at manifold. Second, when I shoot there an air leak behind the bolt and to feel in the hand. How do I know and the ideal fit for the rods

[DIRTYCHEESE]

cheers man. and i will spread the word of your graditude.

[deimossec8]

hi again, thanks I want to ask you another question, I have a shocker shocktech nxt and it has continuous Drop off (the bolt doesn´t move), I cleaned and greased the bolt, fire chamber, sleeve and bolt guide with sl33k, I change the bumper of the bolt guide and all orings, I turn the dwell up and nothing, what can i do?

thanks