Prima Platino Laser Cutting Machine Video
Loading...
Loading...
6:22
Prima Syncrono Laserby PrimaLaser8,972 views- 3:02
Bystronic laser cutting system BySpeed Proby BystronicBestChoice9,100 views
- 0:41
High Speed Laser Cuttingby tonybloom56,171 views
- 2:33
Profile Plus Laser Cutting Machineby robyward4,889 views
- 0:22
How Plasma Cutting Works IIby nielsmiller522,963 views
- 2:06
TRUMPF: TruLaser 7040 fiberby TRUMPFtube18,684 views
- 1:03
Acrylic pattern cutting by Laser cutting machineby lttlaser29,460 views
- 5:13
Home Built 30 Watt Laser Tableby baccus61602,426 views
- 3:32
AMADA High Speed Laser Cutting Blechbearbeitung Laserschneidby sunshine74746,040 views
- 1:12
Bystronic laser cutting machineby TransitusUdo6,114 views
- 5:33
CNC laser cutting Orion 3015 Plus - LVDby LVDcompany16,114 views
- 9:55
Salvagnini Laser L1by karperkoppie6,754 views
- 4:13
Maximo - Large Format Laser Cutting machineby PrimaLaser2,226 views
- 1:16
Laser Cutting Orange Acrylic Lettersby australiasigns40,602 views
- 4:19
lazer kesim laser cutting prima platinoby uzmank252,317 views
- 0:58
laser cutting machine cut paperby glorylaser49,212 views
- 5:51
FIBERMAK - Fiber Optic Laser Cutting Machineby ermaksan162,969 views
- 0:27
CY Fiber Laser Cutting Video.aviby PreferredMFGSolution3,052 views
- 4:31
Laser Tube Cuttingby MarksBrothersInc169,153 views
- 2:02
CNC laser cutting...from my workby sunildmalekar73,637 views
@ColinBurnside 3) If that doesn't help ask a cooling specialist to check R407c refrigerant charging.
Other tips: Maintain a good waterflow by cleaning or replacing the 100micron water filter, 4.5 to 5 bar is perfect.
Seal up the water tank lid with duct tape to prevent durt entering water.
Have the machine serviced every 2000hr by Prima guys, they should do a good job for you.
Good luck. Bonn Lavora !
ybnmachinery 11 months ago
@ColinBurnside The chiller unit is important. First do a functional check by running the Warmup.iso program and follow the water temp. on the chillers display. If you've got a Rofin Slab the temp. should be +/- 1.2 degrees. If you've got an axial flow laser like CP or PRC the temp. range can be a bit bigger say +/- 2.5.
1) Must avoid any recycling of hot air back through the chiller radiator, as this stresses the cooling system.
2) Check contaminants in water, look at the bottom of the tank.
ybnmachinery 11 months ago
@ColinBurnside your mirrors are dirty at y1500 this is common, check for dirt and contamination re-align and happy cutting
lazerbill1 1 year ago
Hi ya use a Prima Platino for cutting flat sheet. Standing in front of the machine the lazer has difficulty frofiles on the RHS front any suggestions? Thanks.
ColinBurnside 1 year ago