Arcade Repair Tips - Wiring A Push Button

Welcome to the Arcade Repair Tips Video Series! In this video, Tim Peterson will show you how to wire a push button correctly for the type of reaction that you want. For more information, please visit our website at www.arcaderepairtips.com and please watch for more videos in the Arcade Repair Tips Video Series! Thanks for watching!

Category:

Howto & Style

Tags:

• arcade
• repair
• tips
• wiring
• push
• button
• cherry
• switch

[fiatbravodriver]

Hi, great video. If you have to replace wires to a arcade push button what type of wire would you use?

[varcadegames]

fiatbravodriver,

We recommend using 18 to 22 gauge braided wire. This is the wire that you typically find on a standard JAMMA harness.

We have also featured your question on episode 4 of our Q&A podcast. Please listen to it on our site for more of our thoughts on this question.

[dre8472]

Thanks for the video. Whats the best way to connect the wires to the actual microswitch prongs? Should I feed and twist?  Solder? Disconnects?

Thanks!

[varcadegames]

We typically use Quick Disconnect Terminals. This makes it easy to replace the microswitch should it go out. You can order them from The Real Bob Roberts.

Thanks for the comment and make sure that you visit our website for more information on these videos.

[grabmygoobers]

My MK2 Cabinet has four buttons in a row inside the coin door. One says credit, two are volume up and down and the last says test. The only two buttons that work are the volume. I checked the wiring and it looks ok. Is there a way to test it to see if it is the buttons that are bad or a problem in the wiring somewhere? Don't want to replace the buttons and find out that doesnt fix it.

Thanks for the helpful videos.

[paramountx]

LOL when you push up

[fiatbravodriver]

Sorry cant find the link to the podcast anywhere on the site?