Published on May 6, 2012
Second flight of my scratchbuilt plane made of 1/2 inch insulation foam. Flew great, but elevator surfaces are too large (need to reduce size to limit response). Large wingflex was caused by the seperation of my 2-piece carbon wing-spar from the wings toward the center of the fuselage on first flight (due to excessive G's).
- JXF 7x4 Prop
- Turnigy Basic 18A ESC
- Turnigy 1300mAh 20-30c 3 Cell (11.1V) Battery
- Turnigy D2822/17 Brushless Outrunner 1100kv
- 3 9g Servos (2 for ailerons, 1 for elevators)
Flying weight is about 500g with just under 10oz/sq.ft. wing loading.
Setup is good for approximately 15 mins. flight time @ 1/2 Throttle.
May 06, 2012 - Ottawa, Ontario
Standard YouTube License