Zodiac 601 HD and Aerovee engine
Loading...
Link to this comment:
Uploader Comments (razvan790120)
All Comments (10)
-
Nice aircraft. I have the same but with BMW engine. Check my videos.
-
it did not take much to life off...
-
Great!! super cool!
-
I only wich that I had the money :-).
250mph sound very nice, :-), I wish I had that performance to...
-
In my opinion your are right. The problem is the engine is very small for that plane. You should try in the future a bigger engine, maybe the Jabiru 3300 or the Rotax 912 ULS. In my Sonex I get 250 mph at 3200 rpm with the AeroVee.
-
Acording to sonex I should have 3200 +-200rpm at 75% thortle, that will never hapend if I dont have a smaller prop both dameter and pitch but then maybe the speed will be to less. maybe on sonex aircraft wich is more aerodynamic then the 601 HD. if I have had an adjustable prop everything would have been eaasyer.
2:00
Street turbo F.I engine built by Chico Performanceby Chico62680,054 views- 3:34
Zenair 601HDSby BlueColorKat2,741 views
- 1:06
Parachute from Zenair Zodiac 601by kazakhpilot21,033 views
- 5:27
Zodiac 601 UL flying over Hungaryby PilotZ601946 views
- 1:31
ULPower UL260i Powered Zenith 650by BusterCheif8,791 views
- 7:07
Crosswind practiceby papipilot1,171 views
- 2:39
Aerovee EFI-TURBO - Final configurationby impultion3,007 views
- 3:43
Homemade jet engine Greeceby gitersaras3,491 views
- 0:30
VW aircraft engine for light airplanesby stolflyer69,396 views
- 5:03
SONEX SPIN flight testby Szkudlarz4,942 views
- 4:02
First Flight of Zenith Zodiac 601XL 19-5466by joph19672,431 views
- 1:04
Zodiac CH-601 HD "D-EPCH" First Flightby dischn22,418 views
- 0:40
zodiac 601 hd low fly by 090412by razvan790120476 views
- 0:36
Cool Video of Zodiac 601 Flying Over the Beach Areaby paulvhhill20,158 views
- 1:16
Aerovee EFI Turboby impultion5,701 views
- 2:15
Sonex With Aerovee Engineby flyingdude6618,765 views
- 0:25
First time Aerovee Engine Start-upby markvale221,502 views
- 6:09
Sonex Sport Acroby waiex2926,378 views
- 0:54
VW Aerovee Engine run up with Slick Magneto #1by TheJettanakorn1,199 views
nopp, maybe 200m or so....
razvan790120 1 year ago
I bhought from the xl and there was only one mod I had to do. The blade that is in the center between the seats which controll the elevator cables is mounted on the side of the pipe. I opend the pipe and let the blade go trough the pipe instead, this way I dont have problems with interfirence of the upper bolt. you´l understand when u se the drawings. I can try to get a picture of it but I can´t promiss it.
razvan790120 2 years ago
I noticed you have dual controls on your plane. Zenith told me that they wern't available for the hds. Did you retrofit them from the xl. If so were there many mods to be done?
AV8NHAWK 2 years ago
if you give me your mail adres I can mail the pictures..
razvan790120 2 years ago