Screw

It is a shaft with a helical groove or thread formed on its surface and provision at one end to turn the screw. Its main uses are as a threaded fastener used to hold objects together, and as a simple machine used to translate torque into linear force. It can also be defined as an inclined plane wrapped around a shaft.

A screw used as a threaded fastener consists of a cylindrical shaft, which in many cases tapers to a point at one end, and with a helical ridge or thread formed on it, and a head at the other end which can be rotated by some means. The thread is essentially an inclined plane wrapped around the shaft. The thread mates with a complementary helix in the material. The material may be manufactured with the mating helix using a tap, or the screw may create it when first driven in (a self-tapping screw). The head is specially shaped to allow a screwdriver or wrench (British English: spanner) to rotate the screw, driving it in or releasing it. The head is of larger diameter than the body of the screw and has no thread so that the screw can not be driven deeper than the length of the shaft, and to provide compression.

Screws can normally be removed and reinserted without reducing their effectiveness. They have greater holding power than nails and permit disassembly and reuse.

The vast majority of screws are tightened by clockwise rotation; we speak of a right-hand thread. Screws with left-hand threads are used in exceptional cases, when the screw is subject to anticlockwise forces that might undo a right-hand thread. Left-hand screws are used on rotating items such as the left-hand grinding wheel on a bench grinder or the left hand pedal on a bicycle (both looking towards the equipment) or hub nuts on the left side of some automobiles.

Threaded fasteners were made by a cutting action such as dies provide, but recent advances in tooling allow them to be made by rolling an unthreaded rod (the blank) between two specially machined dies which squeeze the blank into the shape of the required fastener, including the thread. This method has the advantages of work hardening the thread and saving material. A rolled thread can be distinguished from a thread formed by a die as the outside diameter of the thread is greater than the diameter of the unthreaded portion of the shaft. Bicycle spokes, which are just bolts with long thin unthreaded portions, always use rolled threads for strength.

Category:

Howto & Style

Tags:

• I...
• PUT
• THE
• SCREW...
• IN
• TUNA!