RepRap Mendel making a multiple material part
Loading...
Loading...
5,783
Loading...
Uploader Comments (rhysjones5)
see all
All Comments (3)
-
Cool! This is with the default Java host software? Or something else?
BTW: I thought that silicone and PLA/ABS didn't really stick together very well? I used it as a non-stick surface for one of my extruders...
Loading...
8:39
I love v6 at high speedby VanberloSKI12,210 views- 4:47
Reprap- Day 39 Fully Calibrated and Printing!by GeoDroidJohn11,001 views
- 0:51
RepRap Solder Extruderby rhysjones542,627 views
- 0:49
Reprap Mendel. My first 3D printby evon101014,813 views
- 0:25
RepRap Arduino Mega Pololu Shield beta testsby ultimachine7,612 views
- 0:24
Reprap Mendel test printing a cubeby print3dSA1,049 views
- 1:06
Heater Assembly decision for my Mendel RepRap, part 2by jlkeegan1,987 views
- 4:51
Reprap- Day 31 First Printby GeoDroidJohn13,244 views
- 0:34
First Successful Piece of My Mendel RepRap!by jlkeegan7,164 views
- 4:08
reprap mendel chevy logoby bergsprekken1231,730 views
- 3:52
Standard Prusa Mendel Reprap at 184 mm/s with Klimentkip/caruKlip firmwareby caru835,490 views
- 7:33
Buildin a RepRapby jasperDarmark27,181 views
- 6:24
Reprap Paste Extruder Test 3.wmvby Ioan201116,108 views
- 1:37
Printing a new lower x carridge at 2500 mm/minby mhensen778 views
- 4:27
RepRap Mendel Wiringby RepRapChannel3,381 views
- 1:46
Upside down printing reprap mendelby RepRapChannel6,119 views
- 1:08
RepRap parts tray being RepRap 3D printedby Hantoninnovation487 views
- 1:53
JSR RepRap Mendel Hot End Testby jsr101tube939 views
- 1:00
RepRap paste extruderby adrianbowyer29,364 views
...surprisingly strong, I think the relatively poor surface finish is saving the day. But I intend to come up with some super fancy dovetails to mechanically join them together.
rhysjones5 1 year ago
Its done with the standard Java host software and a small script to take account of the offsets between the extruders.
Re the nonstick - Thats kind of the plan. I've had a go making solid parts out of silicone, but find it takes too long too set/too thin, so tends to deform as it is built (the parts are ok, but could be better). The idea behind this was to build a cast for the silicone as we go. I've made another two material cube where the top half silicone and the bottom is PLA, and its ...
rhysjones5 1 year ago