Dingo Go kart with Honda GX390 13hp engine and a 44mm mikuni carb
Loading...
Link to this comment:
Uploader Comments (MarvinSanti)
All Comments (78)
-
@MarvinSanti oh cool i wanted to make one but i dont know how much hp to put on it
-
hey i have a dingo frame that came with a briggs 5hp and i have a gx390 engine that i want to put on it. Do you know if i would have to modify the mount on the frame in order to fit the engine and also would it work if i just bought a 1 inch diamater torque converter piece for the drive shaft and used the exsisting other pulley
-
@MarvinSanti thank you but can u send them to this account my bad about that it was my brothers and he left it up and i thought it was mine
-
@HushFoo234 send me your e mail thru a private message, I'll send you additional photos which I think will help you with your project.
-
Hushfoo is me my bad to confuse u i thought i was on my account sorry
4:27Getting the Honda 250cc twinby darrenjlobb15,276 views
Featured Video- 1:17honda GX390 modified 16 to 20hpby makypunk02150,362 views
- 0:34GX390 Cross Kart Walkaroundby eduschouwe6,431 views
- 4:50390 Kart Part Deuceby wertheroriginal10,716 views
- 0:17GX390 Mini bikeby Stang351w35,323 views
- 3:34GX390 Kartby wertheroriginal20,910 views
- 4:08Gx390 Modified 12660Rpmby makypunk0212,698 views
- 1:05Manco dingo 285 5.5HP ohv go cartby thegenrl22,991 views
- 2:30Beefy Go kart Honda gx610 Vtwinby PapaPepperronio152,309 views
- 2:02go kart gx390by ballzupscooby20,014 views
- 6:2613 HP Go Kartingby sse147819,616 views
- 1:58Honda GX390 13 hp engine test cold startby FantasyCustoms4Life12,412 views
- 9:56How to remove the governor on a go kart engine ...by BuggyMasters66,688 views
- 3:11Manco dingo go-kartby jmnic6313,899 views
- 10:03How to get your Honda or Clone motor race ready...by br8kurface22,935 views
- 4:17GX390/420 EggMonster. Engine Updateby lookupparagliding17,950 views
- 3:33My Dingo go kart's restoration process timelineby MarvinSanti10,875 views
- 0:52Donuts on 13 HP Go-Kartby ChrisCTVIE5,313 views
- 2:21GX390 VS. GX200by grippobros4,376 views
- 0:11New drive belt installed!!!by MarvinSanti4,189 views
wats the top speed
lts45 7 months ago
@lts45 back then it was 55mph but I sold the kart about a year ago so...
MarvinSanti 7 months ago
Im also wondering where you got the brakes from and how difficult it is to install. my only problem is i dont have a welder so i dont want to get into a project that i wont be able to finish because of havinf to weld brakets and such
LUMLEY92 11 months ago
@LUMLEY92 To me it was pretty straight forward to swap the factory 5hp briggs for the much bigger GX390. The motor on my kart came from a pressure washer, what I did was to cut the steel plate where the GX was mounted in the washer and welded it to the Dingo's frame. As for the brakes, the best replacement is a 150cc scooter's front calliper, you'll need a welder though or at least I cant figure any other way you could insatall it using just bolts and nuts.
MarvinSanti 11 months ago
@LUMLEY92 Speaking about the torque converter, considering the power and specially the torque output of the GX390 I would strongly suggest you use at least a 40 series Torque Converter from Comet, you can find complete setups on ebay starting at around $100. Anything less than that will simply not be able to withstand the abuse.
MarvinSanti 11 months ago