Deschaine Seamless Gutters

Deschaine Seamless Aluminum Gutters http://www.daviddeschaine.com are stronger, look better, and will outlast any other gutter on the market. Most importantly, our gutters are better because they are extruded from a roll of High Quality 0.32 Aluminum Coil. There are no joints or connections, which tend to leak over time due to expansion and contraction. Deschaine Seamless Aluminum Gutters are manufactured at your door with no seams, no joints, and no leaks.

Category:

Howto & Style

Tags:

• Deschaine
• Seamless
• Gutters
• Maine
• Contractor

[mcrandown]

what a waste of time putting all those extra holes in the trough. does every one in the states install off ladders all the time? in Canada we only use ladders for 8 12 and up

[tmmw19]

A real gutter guy doesn't need a level!!!!!

[gutters1224]

i work with a gutter company and we walk the roof. u dont need 200 extra screws for each peice of gutter u do if u have a good hidden hanger and u slide it up under drip edge and put ur hangers every 24 inches on shingals and 16 on steel roof. us a 4ft level for the pitch. this is why i hate taring off gutters when people dont install them right. u going to go back and fix it when it falls off ion a year or the get water damage cause it runs in behind.

[neoverse]

@mcrandown I don't know about everywhere else here in the US, but if the roof is walkable we hang from the roof every time. Though the ground is muddy and we can't avoid getting it on the roof we stick with the ladders.

[neoverse]

@tmmw19

Very True, but it doesn't hurt to check it after setting the gutter to be sure.

[jrrains]

putting screws in like that is pointless if you slide the gutter under the drip edge it a)would not leak b) would not have gaps behind it needing all those screws. and the music!! are you guys serious sounds like some gay 80's disco crap.

[tmmw1919]

HAHA 3 hours later they finally got the 12ft gutter up....and it took 2 people..

[torontoeavestrough]

Wow! Very different way of installing. I have never seen a gutter with so many screws.

[WHG4661]

WOW! horrible gutter should get installed under the flashing. Bad installation. Hangers are supposed to go in after gutter is set completely under flashing. Maybe you should learn how to do gutters before you exploit yourself to the world with bad technique.

[alicianchuck08]

how do you pitch it and slide it under the drip edge with the screws already in the gutter, that seams pointless, put a hanger every three feet use your eye and the fascia to pitch it,, some people are idiots.

[jsblgb65]

Hey, I saw a 3 inch section where you forgot to put some screws.

[csfe00]

@tmmw19 bullshit