Reprap- Day 90
Loading...
Uploader Comments (GeoDroidJohn)
All Comments (21)
-
@MikeMikeBMX Im here to screw up so you don't have too.
-
@quadrant2005 Good Luck!
-
@FilmFactry Just over 8.0 mm
-
What specs are the brass tubes? I.D.? Thanks
-
Thank you for taking the time to post these videos, Im yet to experience these trials and tribulations, Im currently getting everything together to build a Prusa Reprap im hoping ive made a good move in moving towards building my own 3d printer and that it will turn into a positive peice of kit and not something that will just sit around and not meet expectations.. regards RIchard
-
Thank you for posting your experiences with your RepRap. I just got my first prints with my Huxley. And it's nice to see your early experiences are so similar to mine. Hopefully, I'll to learn from your progress. Keep up the good work.
7:56
Why I am starting to LOVE my 3D Printerby GeoDroidJohn7,690 views- 4:51
Reprap- Day 31 First Printby GeoDroidJohn13,244 views
- 8:39
I love v6 at high speedby VanberloSKI11,819 views
- 4:47
Reprap- Day 39 Fully Calibrated and Printing!by GeoDroidJohn10,652 views
- 1:51
MakerBot - Pink Panther Woman (1-minute time-lapse)by therealtechknight136,925 views
- 1:42
Prusa at 100mm/sby JayDMDigital41,535 views
- 0:41
First Prints on my RepRapby ahmetcemturan9,317 views
- 4:05
Reprap- Second 3D Printer Progressby GeoDroidJohn1,023 views
- 4:36
Mendel doubled accuracy printing.by Madkite827 views
- 1:02
3d printer demo videoby DrWho2008t1016,401 views
- 6:24
Reprap Paste Extruder Test 3.wmvby Ioan201115,872 views
- 0:49
Reprap Mendel. My first 3D printby evon101014,459 views
- 5:04
Reprap- Day 8 Shipping Shock, mocked up the Mendelby GeoDroidJohn2,168 views
- 3:31
Reprap- Day 25 A tale of two botsby GeoDroidJohn935 views
- 2:01
eMAKER Huxley 3D printer support materialby jmgiacalone6,278 views
- 2:30
Aluminium Reprap: first print.by thelastnameavailable9,691 views
- 0:55
Reprap Printing 34 parts at onceby jakepoz6,917 views
- 7:27
What is the Reprap Project? Bottle Opener Time Lapseby GeoDroidJohn805 views
- 1:36
Reprap Project- Prusa Mendel Iteration 2by GeoDroidJohn1,655 views
- 1:30
eMAKER Huxley RepRap 3D printerby jmgiacalone2,280 views
have tried some silver compound used on cpu of computers
karandex 8 months ago
@karandex I've picked up some RAM heatsinks that just stick on they seem to do the job.
GeoDroidJohn 4 months ago
i ordered the v6 hotend(the new one you got) and i couldnt get the resistor to fit. but i found that the paint coating was too thick , so i sanded it down a bit and it fit very nicely. i think its better solution than to make the hole bigger in the block. Camiel from mendel-parts should really get some instructions up on how to assemble the hotend .
also mine came with copper washers to put inbetween the brass parts , supposed to help with binding or something, may be important.
rooski8 8 months ago
@rooski8 I've moved on to the makergear nichrome wire. Using the resistor just seems like a bad idea now. Pushing a resistor beyond its normal use.
GeoDroidJohn 4 months ago
Proosha, not Proosa or Prussia
mpayson 8 months ago
@mpayson Thanks.
GeoDroidJohn 4 months ago