In this video we get to see a very basic setup I made to create pulsed DC electricity. I am using two double A batteries to power a small electric motor. This motors shaft is glued to the armature I took out of another identical electric motor, and that motors brushes and end piece can also be seen.
The red pancake coil is connected to my 12 volt, 2 amp DC power supply. Now, the interesting thing about this setup is that I use the extra armature to pulse the 12 volts of DC. I accomplished this by soldering two of the 3 copper segments of the armature together. This leaves one segment unconnected, and thus, when it rotates, it cuts the DC electricity on and off about 13 times a second.
This is a very crude way to pulse DC, but it works. The small sphere shaped neodymium magnet vibrates very fast and loudly when placed next to the pancake coil, when in operation. It is also sucked into the eye of the coil.... or rather, the eye of the magnetic vortex created by the coil.
It has been said in the literature that Nikola Tesla experimented a great deal with Pulsed DC. What might be called impulse energy. Tesla learnt that when high voltage electricity is pulsed fast enough, it can be split apart from the underlying etheric component that drives electricity in the first place. One can reason that electrons flow in an underlying stream of ether substance, which is the true power and force behind the flow of electrons.
Tesla found that pulsed DC when attached to special coils, could actually be transmitted through the air as a form of wireless electricity.
Another person who experimented with Pulsed DC was a man named Stanley Meyer. He found that pulsed DC of the right frequency can be used to split apart water molecules very efficiently. So much so, that he claimed to be able to run a car on a litre of water and be able to drive about a hundred miles on it.
Others like John Bedini have also learnt how to use pulsed DC and magnets to create free energy.
Marko Rodins coil also uses pulsed DC in a duel circuit in what he calls Synchronized Electricity. His coil is very complex and can spin a magnet in its vortex very fast. The Rodin Coil is said to be constructed in just such a manner so that the natural pattern in which energy wants to flow in is modeled perfectly, and hence, the coil can function without any resistance, and is said to even be an over unity device at the right frequencies and intensities of pulsed DC.
I have not researched HAARP very much, but I can say that it is a very real technology, which is used regularly. Earth quake machines are very real. Other kinds of technologies using RF in the 433 mega hertz range are also used as a form of mind control. Theres so much more to all this than I can say here in a paragraph.....
spiritelemental 2 years ago
Your welcome! ..and Im glad you like my little experiment here. My pancake coil is wound in a simple spiral pattern. Nothing fancy there. Yes, the Rodin coil can definitely be applied here. Rodins coil is made of two separate circuits that are wrapped together, and both used pulsed DC. Only 1 sixth of his coil is powered up at anytime, but the whole thing functions in a synchronized way so that the pulses of the 2 separate circuits from a specific relationship to each other.
spiritelemental 2 years ago
He has kept the details of the exact pulse frequency a secret to prevent it from being used in a destructive way by the power elite.
spiritelemental 2 years ago