Low water sensor

Water gauge sensor, Lights up and buzzes when there is no water in the gauge. (Buzz optional). Another break through for Maxitrak we have developed the first easy to fit Low water alarm for model steam locos. Fits 5mm glass, glass and O-rings supplied to fit 5mm glass to 6 mm fittings. 9 Volt, self-contained set in plastic box with cable connection to sensor. Perfect for low light conditions, night running or people who have poor eyesight.

Category:

Science & Technology

Tags:

• Low
• water
• sensor

[jimbob73514]

Can i use this to measure me custard?

[maxitrak]

You know what i think

so!

[kraenee]

looks like they are on ebay! Also noticed I asked questions about this early on LOL sorry. Do you have any way this could be hooked to a servo for a water pump or a solenoid? It would be great for model steam locomotives and ships if you could use this device to control a water pump.

[maxitrak]

Yes no problem. This water sensor is available from maxitrak or maidstone engineering supplies.

[Mybuddhakitty]

the buzzer will be annoying to any club member.

[maxitrak]

Thankfully you can turn the buzz off if you want to!

[kraenee]

I would like one to run a pump on my steam boat but i do not see it on the site anymore :( where can I get one?

[maxitrak]

yer your right but you can turn the buzzer right down so you can't hear it!

[TOMLAD0]

no good if you have got tinitas

[maxitrak]

yes it could be done, the unit was designed to be robust so it needed a tough box to go in. You could take all the parts out the box which would make it a lot smaller. You could lose the buzzer and have the battery in a separate place that would make it very small! as it is the box is 70mm x 45mm x 26mm so it fits in to a 5" loco cab or boat easily.