2006 Mustang GT Comp cams SPR stage 3
Loading...
Uploader Comments (blackandblown)
All Comments (7)
-
Man, I can't believe how quick and precise this auto transmission is! Plus, with the extra 5th gear versus the pre '05 stangs, it's definitely a leg up in performance and fuel mileage... Not that fuel mileage means anything when you're modded lol ;) They really have a lot of potential though. Awesome man.
-
Very true. People don't see the advantages that an automatic has. They just see that you have an automatic and "automatically" judge you as a pussy or something for not getting a stick shift.
-
From what I hear the fastest auto dragracers just leave it in drive as well. I've often kicked myself for not getting an auto with good stall conv... I may swap an auto in there one day.
-
The first time I watched I thought I saw it shifting right at redline, around 6k but I see that it's 6.5. The cams really open it up on top, I was floored how much more high-rpm hp I have with them. 7k is no problem, I'm just nervous with the stock springs. They ran it to 7.2k on the dyno though and didn't think it was a problem so...I still set my shiftpoint at 6.8k lol.
1:03
comp cams mutha thumpers, mustangby remccoll12,169 views- 0:29
2006 Mustang GT SPR stage 3 Comp camsby blackandblown2,614 views
- 1:17
06 Mustang GT w/Comp Thumpr with Flowmaster A/T (Part 2)by djclay7712,735 views
- 0:29
Mustang Driving awayby ov3n1,636 views
- 1:41
2006 Mustang GT with Comp Cam Mutha Thumpr camshaftsby MasterFranchi16,215 views
- 1:45
Comp Cams SPR Stage 2 w/ Saleen exhaust.by TheKraigster2,488 views
- 1:00
05 Mustang custom grind Comp Cams S197 3Vby uniquestang863 views
- 1:43
2007 Mustang GT - Open Headers, Comp Cams Stage 3 XFI Cams, Livernois Stage 3 Headsby marcspaz24,006 views
- 0:47
2007 Mustang GT Comp Cams VSR Stage 2 Rev and Pull Awayby dateef2,595 views
- 72 videosMy Vlog
- 1:50
07 mustang, comp stage 2 spr cam's, mac lt's, o/r x, pypes mid-muffler catback.by jucostud8,610 views
- 1:21
F150 4.6 281 0-120mphby ERICLSTRUNK30,610 views
- 1:57
Saleen (spr stage 2 cams)by Jbskd279,902 views
- 2:40
N/A S197by ALLMTRS197812 views
- 1:10
Thumpr Ford 3 Valve cams by COMP Camsby COMPCams43,582 views
- 1:16
2006 Saleen cammed, slammed and blownby 06saleen3v211,347 views
- 0:51
Mustang Idle and Revby ov3n2,771 views
- 0:45
4nomore (93 Mustang) Dyno 2009; after overhaul- part2by nicoleb3x31,920 views
- 2:31
Dyno Pulls - Stage 3 Heads and Camsby marcspaz6,431 views
- 0:26
2006 Mustang 4.6L 3v, NSR II Cams, Strait pipesby aedwa0227,986 views
wow shifting from 1-2 was great.....are u using stock heads or ported one,do u swap to 4.10 and new stall
thanks
slim69S 1 year ago
they are stage two ported heads from livernois. at the time it had only 3.73's with a tci stall. it now has 4.10's
blackandblown 1 year ago
You've got some low (stock cam range) shift points. You're probably making great power up to ~7k rpm. My shift light is set to 6.8k. If I had SPR cams it would probably be set to 7k ;-). That's the beauty of aftermarket cams... the guy you're racing with street cams suffocates over 6k rpm while you cruise on by. raise those shift points and take advantage.
rrtx2007 2 years ago
yeah i know. its an brenspeed set the shift points for the automatic and they set the redline to 6500. The tune is crap when i get it to a real tuner i will have them set it to shift at 7K . the cams are just coming on line at 6 so i know what you mean but its hard to shift and hold a camera at the same time. hence leaving it in D lol
blackandblown 2 years ago