Cap Kit
Loading...
Link to this comment:
Uploader Comments (p1899m)
Top Comments
-
anthony6055 that sure was a uncalled for comment Asshole.
2 years ago 3
-
Hey p1899m, I noticed you haven't uploaded any vids in almost a year. I would love to see more instructional videos from you on working on the monitors and just arcade technical videos in general if you can find the time. Thanks!!!
All Comments (15)
-
@trhisdone Yeah those will arc-weld little marks on your screwdriver, can't feel good.
-
2:54 MEOW!
-
thanks for the vid, really useful for a cap refurbishing I have in mind.
-
Well, ordered the cap kit for a Hantarex POLO 25" from Bob Roberts and installed it yesterday. WOW! Screen is like a new one now, AND I found a large cap missing from the board completely! It is SWEET now! Can't believe I did it on my first attempt! Thanks p1899m for the great tutorials. They were all I used to help with my installation and everything went smoothly.
-
Have a Mortal Kombat II arcade machine. The monitor's controls can adjust H&V size,brightness,& contrast, but it has a waviness or flutter. Images are bright and color is good, so didn't know if a cap kit would fix this. It is over the entire screen constantly, not just a wave every second or so. Like when someone turns on an appliance with a motor somewhere in your house. When playing you don't really notice. But if you watch the display it is easily evident. What could be the fix experts?
-
the worst shock i ever got from a cap was a camera flash cap....Hurt like heck...lol
todd
-
why would you want to change the caps on this old crt?
- 8:42
basicsby p1899m5,342 views
- 2:12
Safely Discharge CRT Monitor - Micro Center Shows You Howby MyMicroCenter30,661 views
- 8:59
Arcade Repair Tips - Adjusting An Arcade Monitorby varcadegames9,790 views
- 2:49
Arcade Repair Tips - Safely Discharge An Arcade Monitorby varcadegames16,087 views
- 1:29
Discharging a CRT (or trying to)by turkycheese84,002 views
- 6:11
Arcade Repair Tips - Troubleshooting Monitors With Michaelby varcadegames10,383 views
- 0:22
video arcade G07 monitor chassis flyback smoke testby Wishbringer314,836 views
- 6:54
Cap kit ms pac man wells gardner k4900by ArcadeMonitor738 views
- 11:00
Mame Arcade Machine - My Monitor Hookupby YourMKArcadeSource6,246 views
- 3:42
CRT Recycling by MRT Systemby FATMRT10,799 views
- 0:14
Donkey kong issueby p1899m1,004 views
- 5:17
How to check for high voltage and dischargeby chrisstv197941,417 views
- 5:42
Inside A Ms. Pac-Man Arcade Cabinetby RobBoudon15,939 views
- 10:52
WG K7000 Cap Kit Install For "androtaz05" (Part 2)by YourMKArcadeSource1,686 views
- 9:13
Tron Arcade PCB repairby ajcrm1252,589 views
- 3:45
WG K7000 Cap Kit Install For "androtaz05" (Part 1)by YourMKArcadeSource1,281 views
- 2:59
How to Solder : How to Solder a Capacitor to a Circuit Boardby expertvillage166,126 views
- 3:19
CRT Capacitorby RotogenRay4,730 views
- 1:43
Arcade Monitor Problems Board Picsby lukemorse13,431 views
Your Burgertime cab needs some TLC! Great info also.
YourMameMan 3 years ago
the burgertime is currently undergoing a full restoration with new paint, new stenciled side art, new font art and of course new cpo. It's about a third way done.
p1899m 3 years ago
Question do you need to discharge something else besides the anode?
Like caps ? , is there some that holds charge..?
because If i do that i use a suction Heater gun i wouldn't want to get zapped from beeing too clumsy
hayabusafmw 4 years ago
The larger caps can hold a charge but usually nothing too dangerous. The only time I have been shocked by a cap was when one of the fuses on the monitor board had blown. So discharging at the anode didn't remove or lessen this charge due to the path being broken at the fuse. The shock was very minor and only startled me, it did not cause any harm.
p1899m 4 years ago