zephyr9900's channel

Tormach Series 1 (Serial #128 - fall 2006 vintage) motion demonstration at 10-90ipm on all 3 axes. Disclaimer: Running Mach3.043.022 with a custom...

Increased the rapid speed on the Feeler to 40ipm by changing the Xylotex board from 1/8-step to 1/4-step and redefine steps/inch in Mach from 40640...

Running flood coolant on my Tormach mill (with full enclosure) using the stock Tormach pump--plenty of flow to support two 1/4" nozzles.

My CNC conversion of a Feeler FSM-59 lathe in action, turning .50" nickel silver barstock at 750RPM and 4ipm cutting speed for roughing and 2ipm fo...