yb2normal's Channel

314 subscribers

480,744 video views

yb2normal commented 2 weeks ago

1:51

DIY Steadicam Merlin Glidecam Version 5

This is the 5th version of my camera stabilizer that I've been working on. Once I have more pictures I'll put a webpage up in the same place as my...

19,502 views

yb2normal said:

@didanhtennis It is pretty close. Ideally the gimbal would be directly below the COG of the camera... this helps with rotational stability. However we don't rotate the stabilizer a lot, so I don't mind shifting the gimbal in front or behind the camera COG in the interest of getting the entire c...
- 14:12
  
  Kel-Tec PF-9: EDC (Everyday Carry) Review
  
  The Kel-Tec PF-9 is an excellent choice for concealed carry (CCW). With the right holster, it is easy to carry this little pistol without any disco...
  
  36,070 views
  
  yb2normal said:
  
  @JuniorInEville24 When I said the hammer must be recocked I really meant the slide must be racked in order to even be able to pull the trigger again. And I intended for FTF to imply "Failure To Fire" but realize FTF is short for Failure to Feed... which I did not mean to say. My main point was ...
- 14:12
  
  Kel-Tec PF-9: EDC (Everyday Carry) Review
  
  The Kel-Tec PF-9 is an excellent choice for concealed carry (CCW). With the right holster, it is easy to carry this little pistol without any disco...
  
  36,070 views
  
  yb2normal said:
  
  @rasprotection To clarify, the PF9 is actually NOT second strike capable. The hammer must be recocked if you have a FTF. Love mine, peace!
+ One more video show less
yb2normal uploaded 2 weeks ago

1:15

tsg22 reliability

A test of the TSG22 reliability after a fluff and buff

19 views
yb2normal commented 2 months ago

2:10

DIY Merlin Steadicam stabilizer gimbal

Version 4 of my Steadicam design uses a brand new, extremely compact gimbal design that I got from user WSCLATER. This is by far the best gimbal ...

73,104 views

yb2normal said:

@DaTux91 That is a great question... I heat it to the point of boiling water... 200F or 100C
- yb2normal commented 2 months ago
  
  2:10
  
  DIY Merlin Steadicam stabilizer gimbal
  
  Version 4 of my Steadicam design uses a brand new, extremely compact gimbal design that I got from user WSCLATER. This is by far the best gimbal ...
  
  73,104 views
  
  yb2normal said:
  
  @NuCreativeHIcinema I tried the universal sockets and they are not as precise or friction-free as the U joints designed specifically for drive shafts. I'm sure there are some larger u-joints out their, so your point is taken :)
- yb2normal commented 2 months ago
  
  2:10
  
  DIY Merlin Steadicam stabilizer gimbal
  
  Version 4 of my Steadicam design uses a brand new, extremely compact gimbal design that I got from user WSCLATER. This is by far the best gimbal ...
  
  73,104 views
  
  yb2normal said:
  
  @inanc03 The u-joint is plastic... it is 'ok', not perfect, but it is fairly cheap. I found an all metal version made by OFNA Racing which is a beautiful piece of engineering, no slop at all... but it cost $17!
+ View all show less
yb2normal subscribed to theslowmoguys 2 months ago

1:30

Fluorescent Light Bulbs SMASH - The Slow Mo Guys

theslowmoguys
yb2normal liked 2 months ago

6:46

DIY Steadicam Wedding Shots I've Taken-Raw footage

This video shows some basic steadicam shots that I've taken during this years weddings.

450 views
- 16:03
  
  The Frugal Floater (DIY Steadicam)
  
  http://www.thefrugalfilmmak... Everyone wants a Steadicam! Floating tracking shots can add a unique look to your movie as well as severely cut ...
  
  19,257 views
- 4:58
  
  David Guetta Ft. Usher - Without You - A Cappella Cover - Peter Hollens (feat. JRice)
  
  Please support with the iTunes link: http://bit.ly/HollensJRice
  
  or
  
  http://itunes.apple.com/us/...
  
  ...
  
  70,126 views
+ 2 more videos show less
yb2normal liked 2 months ago

3:57

Body Casing Art! Girl Makes A Mold Of Her Chest!

Facebook page with more pics of the mold http://www.facebook.com/pag... We were going to make a casing mold of Heath...

1,616,714 views
yb2normal subscribed to Kooberz 3 months ago

6:25

Lego Call of Duty MW3 Behind the Scenes

Kooberz
yb2normal liked 3 months ago

2:30

Bricks of War ( Lego Gears of War Animation )

A stop-motion animation based on the Gears of War franchise.

www.youtube.com/kooberz

www.facebook.com/kooberzstudios

www.twitter.com/kooberz

1,322,125 views
yb2normal subscribed to flitetest 3 months ago

11:33

Flite Test - Mikey's FPV v3 - REVIEW

flitetest
yb2normal liked 3 months ago

1:30

Phoenix 2000 FPV

Overview of my Phoenix 2000 FPV electric glider.

Range Video 900MHz / 500mW aerial video system

EasyCap USB

Asus netbook

Virtual Dub

Futaba 9CHP...

9,558 views
yb2normal subscribed to nutnfancy 4 months ago

17:10

"Spyderco UK Pen Knives" by Nutnfancy

nutnfancy
yb2normal commented 4 months ago

0:18

Ke-Tec PF9 FTE Failure to Extract Jam

Firing my Kel-Tec PF9 with Sellier & Bellot 115 gr FMJ 9mm ammo. Loaded 1 round in chamber and 7 rounds in the magaizine. Jammed (Failure To Extrac...

654 views

yb2normal said:

call Kel-tec... I had the same issue on mine (fte at least one round every magazine) and they are sending me a new extractor spring and extractor. It seems to be a known issue because the gal I talked to didn't even try to discuss it much. I said "My PF9 experiences an FTE every magazine" and t...
yb2normal liked 4 months ago

4:02

ViewDo: How To Play Beginner Guitar Chords

Know On the Go! - To Download this and other useful ViewDos to your portable viewer for free visit www.viewdo.com

Learn how to play the basic begi...

7,672,133 views
- 0:13
  
  Kel-Tec P32
  
  Carla shooting the Kel-Tec P32
  
  5,758 views
- 13:53
  
  PM9
  
  Some shooting and early observations with my new PM9, Kahr's smallest and lightest polymer framed 9mm pistol.
  
  70,153 views
+ 2 more videos show less
yb2normal commented 5 months ago

3:04

DIY Steadicam Glidecam

My first attempt at a homemade Steadicam or Glidecam using all-thread rod , pvc pipe and a bit of wood. More details can be seen at http://www.yb2...

315,034 views

yb2normal said:

@TVorNotTeeVee , Yes, sorry about that, the correct pvc diameter is 1/2" inch. It is a tight fit and you have to heat the pvc in order to press the bearing in.
- yb2normal commented 5 months ago
  
  3:04
  
  DIY Steadicam Glidecam
  
  My first attempt at a homemade Steadicam or Glidecam using all-thread rod , pvc pipe and a bit of wood. More details can be seen at http://www.yb2...
  
  315,034 views
  
  yb2normal said:
  
  @lollalot , the copyright is for the contents of the video which is an original work of 'art' (ha ha) minus the music of course which is not mine. The stabilizer design was gleaned from various places on the internet so it's not mine to protect. The only part of the stabilizer I can take credit...
+ View all show less
yb2normal liked 5 months ago

1:24

Lego Matrix Trinity Help

http://www.legomatrix.com/

Lego Matrix Trinity Help.

After around 440 hours of work, and just in time for the 10th anniversary of the original mo...

5,982,684 views
- 1:53
  
  Glock 34: Suck Less!
  
  Just trying to suck a little less with my Glock 34. I'll get there.
  
  7,719 views
- 2:33
  
  Bighorn Sheep attacks Toyota 4Runner : "RAMbunctious"
  
  A wild encounter with a Bighorn at Sinks Canyon. No animals were harmed in the making of this film, nor was the vehicle ;-) Check out Mountain Thu...
  
  487,717 views
+ 2 more videos show less
yb2normal commented 6 months ago

2:32

keychain cam underwater

this is some tests on my underwater case for my keychain camera. simple ABS pipe fittings and a lexan lens, very cheap but very effective :)

234 views

yb2normal said:

That is extremely cool
yb2normal liked 6 months ago

2:18

Jetboil Zip presentation

Præsentation af den nye Jetboil Zip: en neddroslet version af Jetboil Sol.

Læs mere på http://www.spejdergear.dk/s......

5,603 views
- 2:21
  
  Tarp Camping In The Rain - Ultralight Backpacking
  
  http://www.blackwoodspress.... - For more ultralight backpacking gear videos visit my blog!
  
  47,455 views
- 7:46
  
  OES 8 x 10 Silnylon Flat Tarp
  
  Last night my wife and I slept outside. We had thunderstorms and just below freezing temperatures, so it seemed like a good time to get out! (We ar...
  
  8,985 views
- 1:32
  
  Middle st. vrain ice bashing
  
  ice bashing at msv colorado
  
  472 views
+ 3 more videos show less
yb2normal commented 8 months ago

4:13

GOPRO TAHITI The Waterfall.m4v

at papenoo river...

274 views

yb2normal said:

did you do the lense replacement on your GoPro?
- 4:20
  
  GoPro FPV RC SuperSportster Crash
  
  An old RC flyer once said: "If you don't crash, that means you don't fly!"
  
  Anyway, this is another crash video of mine. My second Great Planes Supe...
  
  193 views
  
  yb2normal said:
  
  What I love about this is that your gopro did not miss a beat.
+ One more video show less
yb2normal liked 8 months ago

6:23

Go Pro HD Lens change

Anleitung´s Video zum Wechsel von Objektive für die GoPro HD.

ACHTUNG: Es gehen nur Spezial Objektive für die GoPro HD.

Info: www.Pimp-your-Kopter....

8,772 views
- 6:53
  
  ISS Tour - Welcome To The International Space Station!
  
  http://www.facebook.com/Sci... ... ISS Tour - Welcome To The International Space Station!
  
  ---
  
  Please SUBSCRIBE to Science & Reason:
  
  • http:...
  
  807,897 views
- 1:45
  
  George Takei vs. Tennessee's "Don't Say Gay" Bill
  
  Support George! Fight back at http://bit.ly/dontsaygay
  
  George Takei takes on the Tennessee Legislature and its "Don't Say Gay" bill, in the way on...
  
  1,114,196 views
+ 2 more videos show less
yb2normal liked 8 months ago

2:40

Seth Meyers Roasts Donald Trump - White House Correspondents Dinner 2011

Donald hated every second of it...a very, very good thing.

443,549 views

About yb2normal's channel

YB2Normal.com

Created by

yb2normal

Latest Activity

Jan 13, 2012

Date Joined

Aug 5, 2006

About this user

Eternal Tinkerer, cheapskate

Age

Country

United States

less

yb2normal's channel

yb2normal commented 2 weeks ago

yb2normal uploaded 2 weeks ago

yb2normal commented 2 months ago

yb2normal commented 2 months ago

yb2normal commented 2 months ago

yb2normal subscribed to theslowmoguys 2 months ago

yb2normal liked 2 months ago

yb2normal liked 2 months ago

yb2normal subscribed to Kooberz 3 months ago

yb2normal liked 3 months ago

yb2normal subscribed to flitetest 3 months ago

yb2normal liked 3 months ago

yb2normal subscribed to nutnfancy 4 months ago

yb2normal commented 4 months ago

yb2normal liked 4 months ago

yb2normal commented 5 months ago

yb2normal commented 5 months ago

yb2normal liked 5 months ago

yb2normal commented 6 months ago

yb2normal liked 6 months ago

yb2normal commented 8 months ago

yb2normal liked 8 months ago

yb2normal liked 8 months ago

About yb2normal's channel

Created by

Latest Activity

Date Joined

About this user

Age

Country