-
7 hours ago
1995 Mustang At SGS Dyno Powerdyne
This is my 1995 Mustang with fresh rebuild and new powerdyne blower. It put out 375hp and 370ft.lb. or torque. At SGS dyno in Dillsburg,PA
bcarbaugh • 1,997 views
xcrunnersrock
commented:
-
2 days ago
T-76 Hellion Cobra Bumble Beast
t - 76 hellion cobra
blown32v • 25,086 views
xcrunnersrock
commented:
@amyntage that same company hellion,makes twin turbo kits that allow the use of the supercharger alongside the twins,boost all the time no lag lol
-
2 days ago
SS 4th gear Burnout !
4th gear Burnout with my Head/Cam LS1 Camaro, full bolts-on, 4.11 gear, open cutout and 2 poor tires :P
PwrdbyLS1 • 30,680 views
xcrunnersrock
commented:
@PwrdbyLS1 gears just put you in the power band faster,lower gears means less topend.
-
2 days ago
Z28 slicks launch
Another short video of me playing. I was trying to launch the car on the street with slicks on. Didn't work out so well. As you can see I couldn't ...
Crategxt100 • 96,208 views
xcrunnersrock
commented:
@jmoney321123 all it takes is big cam,heads,intake,longtubes and catback and gears, .30 over wouldnt hurt 310ci lol
-
3 days ago
Pudding Creek Bounty Hole 7-17-10
All of the runs at Pudding Creek's bounty hole July 17th, 2010
getruthless1989 • 120,647 views
xcrunnersrock
commented:
@yz250frider1 thats the general idea of a locker,or mudding,all four tires pulling will have a greater effect then just two
-
3 days ago
79 Ford Bronco Big Block
79 Ford Bronco
79builtfordtough • 361,774 views
xcrunnersrock
commented:
@JeBeatsElectro if he has the right gears to move those tires(at least 4.88)then i highly doubt he can go fast and i wouldnt recommend any corners lol
-
4 days ago
1994 mustang GT GT40HCI, e303 cam, MAC full exhaus
This video was uploaded from an Android phone.
50GTMach1 • 7,672 views
xcrunnersrock
commented:
i have a 95 with a cam,4.10s,shift kit,nitto dr out back,and msd ignition and wires,i wanna get gt40 heads and a bigger cam maybe trickflow stage 3?any guess on horsepower?and the guy i bough it from says it has a b cam but idk if it really does,it sounds like it has a good cam its pretty lopey
-
6 days ago
1993 Mustang Cobra V1 Supercharger
1993 Mustang Cobra #2447
V1 S/C @ 11-12psi
LT's, O/R Hpipe, Flowmasters
TFS Twisted Wedge Heads
218/226 @ .050 - .531/.541 - 112LSA
400rwhp sae cor...
HoleshotKFX400 • 79,776 views
xcrunnersrock
commented:
@MustangCobra22 thats not an sn95. sn 95 is 94-98,thats a 99-04
-
1 week ago
Civic racing Cavilier when a Cobra flys by.
Honda Civic and a Chevy Cavilier are street racing. While they're giving it all they got, a Mustang Cobra flys by them like they're standing still.
BeerBrewin • 82,561 views
xcrunnersrock
commented:
@slow281gt no they werent lol i have a 95 cobra clone,gt with the cobra motor and badges,i wish they were blown stock back then,save me hella lotta money.
-
2 weeks ago
Camaro Z28 vs Charger SRT8
H/C Z28 (on motor) vs Bolt ons + 150 shot SRT8. 50 Roll...
ThisIsFake187 • 54,952 views
xcrunnersrock
commented:
@YellowCamaro85 100lbs=1/10.just saying.stock for stock ls1 loses,ls1 had just a cam and longtubes and tune.srt is doneeee
-
2 weeks ago
Corvette ZR1 angry sound
My Facebook Page - http://tinyurl.com/6385qw2 Blog - http://dtrockstar1.blogspot...
Chris Ashworth records the angry sound of a Corvette ZR1, an...
DtRockstar1 • 401,020 views
xcrunnersrock
commented:
@MIA7Xthies cammed.
-
2 weeks ago
Amazing New Dodge Viper ACR-X V-10 Dyno Test
Viper Powertrain Development Engineer Dick Winkles takes us through a dyno test of the V-10 powerplant under the hood of the Dodge Viper ACR-X race...
autotuningnews • 391,972 views
xcrunnersrock
commented:
@rmf09024 insurance reasons,same as with the ls1 for chevy
-
2 weeks ago
DenHummer1 • 514,423 views
xcrunnersrock
commented:
@Redneckalec you dont pay attention
-
1 month ago
NOS sniffing 347 Stroker vs SVT Cobra Terminator (Mustang-Town)
2004 Supercharged SVT Cobra "Terminator" taking on a 347 Stroked and "Nitrous sniffing" Mustang LX, in a Backstreet Brawl in Mustang-Town...
Film...
NedacFilms • 157,725 views
xcrunnersrock
commented:
@Alro451 not slicks,drag radials
-
1 month ago
NY S10 Bubbalicious on 44,s
My S10 on 44 boggers name bubbalicious 400 H P 1 ton axles not for sale
1966bubbalicious • 30,370 views
xcrunnersrock
commented:
d60 front and rear?355 small block?what gears are you using to turn those tires?
-
1 month ago
CHEVY SB WITH 44's and Dana 60 MUDDIN AT SHORTY'S
Johns black chevy muddin with 44's boggers and a Dana 60 frontend. Mud pit is at blackankle
#70 - Most Discussed (Today) - Autos & Vehicles
#174 ...
JTarver420 • 57,422 views
xcrunnersrock
commented:
@MrAradias lol NO.
-
1 month ago
SUPERMAN FORD CUTS 54" BOGGERS and TAKES HIS SHOT AT THE CRAZY EIGHT on the MARDI GRAS RIDE
Jake takes on the Crazy 8 at River Run near Jacksonville, TX in the new Superman Ford on 3/5/11. 521 Big Block Ford, 4spd manual, 205 divorce, 113 ...
JTarver420 • 24,616 views
xcrunnersrock
commented:
@7point3FORD more wheelspin.
-
1 month ago
cmagrum5 • 522,923 views
xcrunnersrock
commented:
wheres the picture of that dodge blowing smoke from??
-
1 month ago
Twin Turbo Duramax burning off the 40's
http://www.atsdiesel.com/yo...
100ft burnout with the LMM Duramax. The truck has an built ATS transmission, ATS compound with an Aurora 7000, i...
ATSDieselPerformance • 291,606 views
xcrunnersrock
commented:
brandddd new tires lol what were they?i know 40's but what tire.
-
1 month ago
Dodge Ram SRT-10 Powerslides - Gran Turismo Polonia 2010
© by Damian "zroRTE" Kończal
zroRTE • 49,415 views
xcrunnersrock
commented:
@wtl1964 suspension,probably slightly more power and torque.
-
1 month ago
CRAZY MUDDIN at CRAZY 8!!
http://www.triplexmotorspor...
A compilation of various trucks and ATV's muddin during the day Saturday at the Crazy 8 at River Run ATV Park nea...
rekjavicxxx • 3,644 views
xcrunnersrock
commented:
it has power lol plenty of it,if it lost like 1k pounds itd be different not to mention how much 54inch boggers weigh lol gotta have madddddddd power,lowwwwwww gears and good lockers.
-
1 month ago
5.0 mustang dyno with trick flow top end kit
I installed a Trick flow top end kit with stage 1 cam and when all was said and done i pulled 320hp and 328tq. Thats with the air/fuel at 12.5/1 ra...
zombies6336 • 1,999 views
xcrunnersrock
commented:
i dont have a fox but i have a 94 gt with the 5.0l im getting the trick flow top end from summit does it include everything??i know i have to get a spacer and adapter but anything else,and how can i tune it?it already has a catless xpipe and dumped flowmasters
-
1 month ago
First Run with New Trick Flow Kit
Trick Flow top end kit
krychrt • 79,553 views
xcrunnersrock
commented:
@hector62892 tune,3/8 intake spacer and if its a sn95 mustang then a sn95 adapter
-
1 month ago
Eagle Skate Competition 08
eagle skate park competition
jetsam42 • 5,231 views
xcrunnersrock
commented:
@Drum0ff mhm.there dicks about it
-
1 month ago
1400hp Turbo mustang
lonnie sheppards 1400hp 101mm turbo mustang on the dyno
sheppardsraceing • 11,399 views
xcrunnersrock
commented:
@91fiveohnotch supercharged 390hp termi 6 spd vs supercharged 390hp fox 6 spd the fox will pull nastyyyy on the termi
-
1 month ago
Yellowcard - See Me Smiling (Acoustic) (Official Music Video)
Directed By: Robby Starbuck
Buy 'When You're Through Thinking, Say Yes (Acoustic)' on iTunes here: http://hopel.es/xGa9ve
More from Yellowcard: ht...
HopelessRecords • 48,227 views
xcrunnersrock
favorited
-
1 month ago
dodge ram mud bog
2001 dodge ram 5.9L 4X4 with a 8" sky jacker lift with 35" dick cepek mud country tires playing in the
mud
nathangerman • 32,242 views
xcrunnersrock
commented:
do these tires clean out well enough?im thinking of getting 35's but i wanna know how they do
-
1 month ago
Testing: Goodyear MT/R with Kevlar
Goodyear sent us a set of the new Goodyear MT/R's with Kevlar to try on about a month before the media event on 2/20/09 in Johnson Valley. We set a...
jeepschool • 22,643 views
xcrunnersrock
commented:
how do these tires do in the mud?im thinking about getting a set of 35's but idk how they do
-
1 month ago
1999 Chevy Silverado Lifted
A walk around of my truck,
RYBO1000RR • 26,541 views
xcrunnersrock
commented:
can you lock the front end?its IFS so i have no clue if i can lock the front end on my 98
-
1 month ago
NEW YEARS MUD TRUCKS - LIKE NO OTHER!!
It's been a LONG time since it rained enough in East Texas for there to be substantial mud....until now!! One of the largest turnouts of mud trucks...
rekjavicxxx • 8,189 views
xcrunnersrock
favorited
-
1 month ago
1987 dodge with a cam
1987 dodge, 318 bored .30 over big cam
stevenjordan12345678 • 16,733 views
xcrunnersrock
commented:
thats what it said the specs for the cam are idk if its the adv duration,and im getting hooker longtubes lol
-
1 month ago
1986 dodge 4X4 318
this is after we went mudding trying to get stuck but we couldnt
dodgearethabest • 2,302 views
xcrunnersrock
commented:
what rear axle does this have?im getting a 85 w150 power ram and have no clue what axle or gears are in the rear
-
1 month ago
dodge w150
me sliding in my dodge, 318, straight pipes, 31" mastercraft tires
83dodgeram150 • 6,225 views
xcrunnersrock
commented:
what rear axle does this have?is it the same for 1985 models?
-
1 month ago
1985 Dodge w150 (#3)
having some fun one day
Hamburgeler28 • 2,175 views
xcrunnersrock
commented:
wouldnt aftermarket headers fix the leak?i am about to pick up a 85 w150 and it has a exhaust leak as well,anyone know how to add another 50 or 60 horses to a 85 318?it just doesnt have the power i want or need
-
1 month ago
open cutout rev, 1st-4th gear in car
vid of my old 02 ws6 with 443 rwhp, open cutout rev, and in-car run through the gears.
yes... it is a ws6. i sold the ws6 hood and put a trans am ...
LordofChaos187 • 102,230 views
xcrunnersrock
commented:
how is the locker on the street?
-
1 month ago
LT1 z28 camaro comp cam
87 z28 with lt1 ported and polished comp cam lift.576 .571 dur.230 .236
badtoys100 • 53,641 views
xcrunnersrock
commented:
would that cam work in my 93 lt1?
-
1 month ago
My 94 Trans Am Exhaust
SLP cold air intake, hooker headers, y-pipe, high-flow cat, flowmaster 40 series
HawkeyeGuy06 • 21,660 views
xcrunnersrock
commented:
horsepower?
-
-
-
2 months ago
Camaro puts aggressive Acura back in its place
100% stock (right down to the paper air filter) 1993 LT1 powered Camaro automatic, out for a cruise after a couple base Dyno pulls, and ran into an...
NedacFilms • 129,187 views
xcrunnersrock
commented:
@blopeezy it has 275bhp,230rwhp,easily push that to 300rwhp,headers,full exhaust,cai,tune.
-
2 months ago
GOT MUD TRUCKS?!?
Some mud ruts at the behind the creek at Bettie Bottoms. The Superman Ford, Overstreet's Dodge and Brent's Dodge tried these ruts. There was a mega...
rekjavicxxx • 3,526 views
xcrunnersrock
commented:
tires on the red dodge are garbagee,not even cleaning out:(
-
2 months ago
Turbo LT1 Camaro
Second start up ever with this turbo kit. on 93 octane, still needed some work in this video. The Turbo kit is 100% custom made by Hi-Tuned Perfo...
biginchsmallblock • 5,876 views
xcrunnersrock
commented:
@raulz28 i meant 300bhp,but if 300rwhp is possible with just 1500 dollars of mods then im all for it,so longtubes,exhaust,cai,tune,and 3.73's and idk say a 3000 stall would be 1500 or less?
-
2 months ago
1996 Formula LT1 with edelbrock headers, and borla 3 in pipes
Just a walk around showing what I know for sure to call. My camera died before I got to finish up so... The passenger window is either off track ...
j2tus2000 • 1,397 views
xcrunnersrock
commented:
@guy80263 the lt1 came 275 and later versions had 285,the most powerful 4.6l in the mustangs was 05-10 305hp,but they weigh so damn much a lt1 with headers,exhaust and gears would pull on em hard,lt1's are more powerful stock for stock then almost any mustang gt lol if im wrong correct me.
i have a 95 with the bcam,26lb injectors,longtube headers,4.10s,shift kit,.30 over,can i bolt a powerdyne bd11a to work on my car with no other mods?and about how much power and torque do you think?