wrightmachineworks's channel

We answer the question if potassium metal would react with ice.

How to make a glow stick reaction with real chemicals. Not a fake like mountain dew.

Check our other glow stick videos too:

http://www.youtube.com...

Tubalcain shows how to mill a female dovetail. Project---A thread cutting stop for the 9" South bend lathe. Part 2 of 2

Pouring molten bronze with a home-made backyard furnace at the Stones River Art Foundry in middle Tennessee on 20 Mar 2011 (The Foundry's about to ...

Learn how to make a flaky homemade pie crust in seven easy steps.

The tastiest pies are made from the crust up. In this video, you'll learn how to...

TERT RUN OF JET KART

Casting bronze at home

www.dashrecipes.com Learn how to make perfect, flakey pie crust with Parade & Dash editor Shannon McCook.

A detailed look at the 12V. Beekeeping Embedding Tool for my friend Atila in Serbia.

Here, I show making a casting with 5 cores (minus the pouring itself).

This is part of an endless project of a model. This casting is for an electr...

Making the pattern for a water cooled cylinder head of a model power plant.

Sand is oil bound, cores are resin bound (cold box). Additional access ...

In Autumn 2007, the bells of St. Mark's, Cheltenham were finally restored. The old "challenging" ring of five were augmented to eight and re-tuned....

http://www.facebook.com/hyp...

http://www.hyperthrash.com

http://www.twitter.com/nyli...

Homemade marine 1880 saluting cannon replica brass cannon look at my other project videos and rate

SLAYER!! I HAVE BEEN A FAN FOR OVER 20 YEARS AND THIS TOOK ME A LONG TIME TO DO.WATCHING IT IN PERSON WAS AWESOME. DEDICATED TO SLAYER AND ALL THE ...

Interview with Stockwell studios member Mathew Dart for BBC London 94.9 fm. 15/02/2012

amazing driving skills ,,for get about the music just watch it,,try if you can do the same

After many question on how the burner works i did a short video on its construction and the parts in it and where i got the parts form

I hope its ...

After many question on how the burner works i did a short video on its construction and the parts in it and where i got the parts form

I hope its ...

Tested the vapouriser with water and seemed to work good atthough the 1/4 nozzle opening was way to big . I reduced it down to 1/8 and will test wi...

I'm using my "Young ginger" to make some crystallized ginger, ginger syrup & pickled ginger.

You can join us on our FIELD TRIPS. Beehive set up. How I keep bees here in sub-tropical S.E. Qld. as a passionate part-time beekeeper for over 20 ...

Пятков и Ко (часть 2) - Pyatkov & Co bellfoundry (part 2).

Discovery / Science Channel's "How It's Made" Bronze Bells episode

Shilo, Manitoba - Afghan National Army develops as professional force with NATO mentors.

Episode 190

For more information on the Canadian Army nd...

A song about pop music by Jon Lajoie.

Voyous Films

Director: Julien Demers-Arsenault

DOP: Van Royko

Choreography: Mabel Palomino

Stylist: Patrici...

This is a clip from our series of brick laying videos. Check our website for more information about learning the art of laying brick with our easy ...

John learns the finer points as Bob casts 600 lbs. of bronze. The place is Gilmor foundry in Ohio, run by Bob Gilmor.

We are Springfield Arsenal ...

deepfryer oil foundry , casting

This is design #2. This will technically be an overunity motor if I can get the electromagnet built to the right specs. When this is done, I'd like...

I have yet to put in the insolation . Didnt want to spend the cash till important part was working . In the next vit i will explain the set up . I ...

This is a 70KW Waste Engine Oil Burner we were working on and decided that as it was producing a 800mm long flame it would be a good idea to see if...

Got the blower and propane hooked up . The oil test is yet to come . StY tuned

Belle Minimix Cement Mixer

Making Alcohol and moonshine using a alcohol still or a moonshine still with turbo yeast. 100% Moonshine still.

Home built sand muller made from a small Harbor Freight cement mixer and salvaged bearings, misc. steel. Seems to work great and should make tempe...

Пятков и Ко (часть 1) - Pyatkov & Co bellfoundry (part 1).

A short video showing how the sand is prepared for use.

How to make a greensand mould using a loose piece.

Visit http://www.refinishnetwork.com for more auto body repair information.This is of a Harley and is being sprayed crimson red. The kandy paint jo...

Things don't always go well in the home foundry.