weldreality's channel
Loading...
44
subscribers
120,086
video views
Uploaded videos
1-10 of 54-
TIP TIG better than CMT and the Hot Wire TIG processes
weldreality
47 views
You can take your time setting a robot and then doing the manual repairs, or you can weld with TIP TIG a process thats easy to use, provides the best possible weld quality,...
-
TIP TIG. Why purchase a robot?
weldreality
20 views
You coould invest over a $100,000 on the following
[a] a robot and hot wire TIG, [b} a robot and CMT equipment, [c] Polysoude and TIG equipment, or for 25% of the cost p...
-
TIP TIG easy for 100% X-Ray requirements
weldreality
54 views
You can spend much more on CMT or use a costly robot but you will not attain the weld quality achieved with a manual TIP TIG weld. No defects, no fumes, no spatter and lowe...
-
TIP TIG Stainless - Inconel, highest weld quality
weldreality
34 views
TIP TIG Nuclear - Defence - Power - Oil Industry weld parts. When you want better weld quality, with the lowest weld distortion, lowest weld fumes, no clean up, no fumes, a...
-
TIP TIG high strength steels welds
weldreality
161 views
TIG TIG superior quality than TIG and Pulsed MIG. - 300% faster than TIG. - Easier than TIG. - No foot control. - Lowest weld heat. - Lowest Distortion. - Best mechanica...
-
TIP TIG lowest stainless distortion
weldreality
132 views
Controlling stainless distortion is a simple task with TIP TIG as this process welds faster than TIG and puts less weld heat than any other process. As a bonus TIP TIG is ...
-
TIP TIG, best method for auto pipe weld & cladding
weldreality
170 views
TIP TIG provides superior pipe weld quality than regular TIG and can make those manual or auto pipe welds 100 - 400% faster than regular TIG. Meeting 100% X-RAY with any p...
-
TIP TIG weld Solution to Flange Distortion
weldreality
685 views
You need to weld stainless or inconel flange to tubes. The flange has a double vee groove requiring a full penetration weld. The flange has bolt holes, with the high TIG w...
-
TIP TIG PIPE ROOT IS RELAXING & EASY
weldreality
660 views
If you had to provide TIG welds for a nuclear plant or for an oil platform which process would you rather use, regular TIG or TIP TIG? The TIP TIG process will produce bett...
-
TIP TIG. Super Duplex, Vert Up Weld made simple
weldreality
609 views
300 - 400% More weld each hour than regular TIG. Always superior quality than regular TIG. Note two hands on the torch. Note also no weld fumes.
Advertisement
About weldreality's channel
more
less
Play all(54)