-
3 weeks ago
"FF-Class" Dell PowerEdge Boat Anchor
Here we have my latest addition to my collection, the Dell PowerEdge 1400. This thing was gotten for free and does not work. Apparently, it doesn...
jdomenech1986 • 70 views
w9gb
commented:
-
2 months ago
BitX20 Ver.3
Final test using an amplified Astatic Mic for CB..Good reports obtained even though many said that my voice is more on the treble CB type quality.....
yc0nsi • 1,913 views
w9gb
commented:
IF you desire a more Heathkit style kit, then Hendricks Kits provides this with enclosure.
at QRPKITS dot COM
-
2 months ago
Halicrafters 506 restoration - part 4o14
Restuffing the electrolytics. Here's my technique for restuffing tubular, paper electrolytic capacitors.
bandersentv • 364 views
w9gb
commented:
Another recommendation is to "date" (month and year) of when you re-stuffed the caapcitors.
Good reminder for the next restorer - when you did the work (and it is repaired by the next generation).
-
3 months ago
LED Cube How it works
kdarrah1234 • 111,470 views
w9gb
commented:
You have a matrix, and mathematics and support chips can help make larger cubes with that same uP.
The LED cube remind me of core memory used in the early computers. Each LED in a 4x4 matrix (floor) can be represented a Base16 (Hexadecimal) number.
This would be a good visual teaching method a...
-
3 months ago
Heathkit H67 Emulator Part 1
SASI to IDE converter that allows the Heathkit H-8 Computer to boot CP/M from a CF card. The H67 Emulator connects to the H-67 controller that allo...
norby1131 • 718 views
w9gb
liked
-
3 months ago
w9gb
commented:
Nice to see the original Heathkit computers updated and still running !
-
-
3 months ago
Homemade computer Z80 - "JLR's Computer 1" - Programme : "Va et vient"
JLR's Computer 1
Ordinateur fait maison avec un processeur Zilog Z80 et 8 Ko de RAM
tournant à 64 Hz ou 4 MHz
userjlr • 1,946 views
w9gb
favorited
-
3 months ago
w9gb
commented:
USE Google. N8VEM, Herb Johnson'w web page and Vector Graphics / Altair are good starts for Z80.
-
-
3 months ago
Tour of a (needing restoration) IBM System/34 - Part two
A wander around my rather manky IBM System/34, highlighting how it works (roughly), its various components and what I've got ahead of me.
jpkiwigeek • 983 views
w9gb
commented:
The IBM System 34 was largely built at IBM Rochester,MN. Many good retired techs in that area to assist. System 34, 36 and 38 were used in Eastern Iowa -- due to close location of IBM plant. University of Iowa Foundation was a beta site for the AS/400 hard drives in early 1980s running on thei...
-
3 months ago
Geek's Basement, part 2
A quick waffle through my basement.
Not exactly earth shatteringly interesting, but it's been a while and I've felt bad about not sticking anything...
jpkiwigeek • 998 views
w9gb
commented:
Iowa State University used IBM series/1 for their original residence hall meal card system. Yoder Feeds in Kalona, IA also had one for real time usage in elevators.
Your NORAND was built in Cedar Rapids, IA where company was located in 1970s and 1980s. They were acquired (Symbol?), their system...
-
3 months ago
Vector Graphic 5032 Tour, Part Two
Overview, description and break down of the fantastic S-100 bus, Z80 powered Vector Graphic 5032 multi-user "desktop" mainframe system.
Part One: h...
jpkiwigeek • 362 views
w9gb
commented:
If you sell the case, minus hard drive -- let me know.
-
3 months ago
Z80 Computer - Mark 2
A video giving a rough overview of a a completely new design for a Z80 computer I've been working on.
I have not yet had the time to tidy up the co...
benryves • 3,930 views
w9gb
commented:
Very nice work. I actually started in electronics hardware and migrated to software when these chips were introduced in 1970s. Construction today is much easier, thanks to a wide range of logic and special function ICs. Cheers!
-
3 months ago
w9gb
liked
-
-
3 months ago
Z80 Computer
A brief description of the current components and problems in the design of a homebrew Z80 computer. Please see http://benryves.com/project......
benryves • 14,296 views
w9gb
commented:
The N8VEM project provides the SBC board for $20 USD plus postage. You supply parts and DIY, basic support available in build manual and Google discussion group.
Nice entrance ramp.
-
3 months ago
EM84 vs VFD VU METER
Duszkowski • 7,911 views
w9gb
commented:
I have a spare VFD (Japanese mfg) but have found little information for proper connections of this OEM part.
-
3 months ago
Homebrew 6809 Computer: I2C, Clock, Nixie Tubes!
I've added expansion slots to the board, and I have it connected to a 6821 Peripheral Interface Adapter.
The 6821 is then connected to a DS1307 re...
74hc595 • 4,429 views
w9gb
commented:
Very nice work. The Motorola 6800, 6502, and 6809 are being added to N8VEM and S-100 Computer projects .... Check out progress or provide your insight / talent.
-
3 months ago
N8VEM 68k S-100 board freerunning
A short video showing a S-100 68000 board operating in freerunning mode.
Super6502 • 363 views
w9gb
commented:
Check out N8VEM and S-100 Computers web sites. Use Google -- that is purpose of a search engine --- BUT you have to Ask the Question.
-
3 months ago
Heathkit ID-4001 Digital Weather Computer
My Heathkit ID-4001 Weather Computer I built in 1990. Still going strong!
tperks50 • 377 views
w9gb
commented:
Heathkit ID-4001 Support or Parts:
Forecast Technologies
1040 W. Las Palmas Ave., Suite B #202
Patterson, CA 95363
forecasttech@yahoo.com
==
Data Professionals
1807 Santa Rita Road
Suite D PMB 277
Pleasanton, CA 94566
Phone: 925-548-6404
Sales@D8aPro.com
-
3 months ago
Heathkit Weather Station ID-4001
Digital weather station with anemometer (which can record peak wind gust and wind average), barometer (with tendency readout, minimum, maximum and ...
RailKelowna • 1,192 views
w9gb
commented:
Heathkit used the National LM3911 temperature sensor in their ID-1490, ID-4001, ID-5001 WX stations. Since that part is no longer mfg. -- you can use the currently available National LM335 temperature sensor, LM741, 6.8 Volt zener diode, and one resistor. The circuit was taken directly from t...
-
4 months ago
altair 8800 project
Looking at restoring this Altair 8800 computer.
Wouldn't mind some day getting Basic running on it.
I am no expert on these machines and this is my...
GreenMeanie101 • 947 views
w9gb
commented:
Given the age of these first generation micro-computers (> 30 years) -- Electrolytic capacitors in the power supply section should be replaced as part of ANY restoration before inserting cards into the S-100 bus .. then a VOM or DVM can be used to check voltage levels.
w9gb
-
4 months ago
S-38C Restoration, Part 4 - Now We're Done!
Final video on this receiver. I repainted the logo the correct colors, Added a bottom panel and back panel that I fabricated. Reproductions are ava...
GeoN0JRJ • 361 views
w9gb
commented:
For other S-38 restorers -- Retro-Tronics, which sells on eBay, makes Laser Cut carboard backs and bottoms for MANY classic 1930s to 1950s AM/Sw receivers
In addition, the original company in Chicago that made these pressed backs and bottoms has made them again for Hallicrafters restorers.
Bob ...
-
-
4 months ago
40 Meter Dipole.wmv
AE4GW • 10,340 views
w9gb
commented:
When building a simple half-wavelength 40 meter dipole -- it is always best to be LONG in your length, which you can easily shorten. It is HARDER to add length to a dipole and maintian overall strength.
BTW, why not build a 40 / 15 dipole ?
a 1/2-wavelength dipole cut for 7.1 MHz .. is a 3/2-wa...
-
4 months ago
Home brew ham receiver demo..it's the KJURKN
My homebrew ham receiver in action on 80 meters.. a work in progress..WA6KJN..
shellieleroy • 3,096 views
w9gb
commented:
You LED freqeuncy readout reminds me of Wes Hayward's QST articles in 1970s and 1980s, that you referenced.
Your front panel reminds me of the brush aluminum Kenwood AM/FM receivers of the 1970s.
w9gb
-
4 months ago
Drake R4A Amateur Radio Receiver
I found this radio on Craig's list. It's a 13-tube, Drake R4A Amateur Radio Receiver, serial #2413 -- Made in Miamisburg, Ohio. It was stored in a ...
canerods • 1,303 views
w9gb
commented:
There are a couple of former Drake service teshs who still service these (and have hard to find parts) -- if you need reference - let us know.
Do you have an FCC amateur radio license?
-
5 months ago
Ham operator causes outrage with 11 radio towers
US ham causes local residents anger by being approved to install eleven ham radio towers on his property. One of them will be 200 ft high.The neigh...
JDzPiT • 22,938 views
w9gb
commented:
The WEEK-TV (NBC affliate in Peoria) shows taller cellular phone towers .. not amateur radio towers .. that is poor TV journalism (lazy video editors).
What was not shown is that a Commercial BROADCAST TOWER is across the street from one of these neighbors. Guess WEEK-TV and Mr. Martin failed t...
-
5 months ago
Dave leaves HAL 9000 speechless
An edited scene from "2001: A Space Odyssey" Open the Pod bay doors
RobtheBig • 45,479 views
w9gb
commented:
Dave Cutler is the designer and developer of several operating systems including RSX-11M, VMS and VAXELN at Digital Equipment Corporation (DEC).
He left Digital Equipment Corporation to join Microsoft in October 1988.
He led the development of Windows NT (WNT) operating system.
Increment every l...
-
5 months ago
Railfanning The BNSF/KJRY Diamonds, Bushnell, IL. 4/8/09.
After seeing videos from MarvinMcgill and others from this spot, I thought I'd pay it a visit. I arrived here at about 4:30AM to catch the U-SEMBIR...
BoxcarFrank • 6,149 views
w9gb
commented:
CB&Q use to have full-time crews in Bushnell (1960s).
The new high capacity grain terminal, 4 miles south of Bushnell ("9 mile Y" for locals) on the Paducah branch, -- and Amtrak Carl Sandberg has increased overall rail traffic thru Bushnell.
BNSF is lengthening pasing sidings and double tracki...
-
5 months ago
BNSF Bushnell Il.
Roadmaster on the BNSF
MarvinMcGill • 755 views
w9gb
commented:
The highway bridge is IL 41, just south of Bushnell.
The Roadmaster is headed south on BNSF, Beardstown/Paducah line (old southern IL coal line).
Tracks in foreground are old TP&W, now operated by Pioneer Railroad.
-
5 months ago
Carl Sandburg with two P42s up front at Downers Grove
The westbound Carl Sandburg blasts through with two engines, AMTK 25 and 119, for 4 cars. They were doing some kind of testing with the second unit...
MP36er • 397 views
w9gb
commented:
That is the "new" morning train run to western IL (Macomb and Quincy) on the Quincy leg of the old CB&Q line. Great for WIU and Quincy College students.
Passes Illinois Zephyr (inbound AM train) at Mendota.
-
5 months ago
Amtrak #5 arrives Princeton, Illinois on 06-16-2010.
This Hogger knows how to really run a train!
DJHOGHEAD • 153 views
w9gb
commented:
California Zephyr
-
5 months ago
Amtrak at Mendota.
Amtrak 383 coming into Mendotoa. We caught it on our way back from Rochelle.
LukeID • 119 views
w9gb
commented:
Illinois Zephyr headed WEST to Macomb and Quincy, IL
-
5 months ago
Rochelle & Mendota Illinois Foaming Part 1
On 5-8-10 i met up with Tim and railfaned Rochelle & Mendota. Our first stop was Rochelle, to have breakfast and to see if we could get anything tr...
LenaVideos • 440 views
w9gb
commented:
The Amtrak morning trains at Mendota (old CB&Q route) are:
Illinois Zephyr (headed to Chicago) and
Carl Sandberg (headed to Macomb and Quincy).
This is one of Amtrak's best routes (and on-time or ahead of schedule) -- Thank's to historic and preserved CB&Q triple track alignment from Chicago ...
-
7 months ago
THE TOWERING INFERNO - INNOVATING TOWER - THE SPFX OF AN INFERNO
THE TOWERING INFERNO - INNOVATING TOWER - THE SPFX OF AN INFERNO
BlaineBingham • 5,063 views
w9gb
commented:
Joseph F Biroc A.S.C. and Fred Koenekamp A.S.C won the 1974 Academy Award for Best Cinematography for The Towering Inferno.
Koenekamp was Director of Photgraphy and Biroc was the Director of Photography for the Action Sequences (Irwin Allen directed the Action Sequences).
-
7 months ago
Heathkit HR10B receiver
Heathkit HR10 receiver. Working but still needs some work, probably has some bad tubes in it. Already replaced the filter caps.
chrisw71 • 6,013 views
w9gb
commented:
First Heathkit receiver that I built in 1972.
-
7 months ago
Mission: Impossible Opening Montage 1
Each episode of Mission: Impossible featured a unique opening. Clips from the upcoming show were edited together in the fast-paced style of Lalo Sc...
crocoboxer • 2,696,026 views
w9gb
commented:
The Cold War (and popularity of Sean Connery as James Bond) made this series very plausable.
There was also, Man from Uncle, I Spy, The Name of the Game, Probe/Search (1972/73).
-
7 months ago
Hawaii Five 0 Intro
The Greatest Theme Song Of All Time
bfelten • 7,271,174 views
w9gb
commented:
This was a favorite score for high school / college bands (and marching bands) .. until the Rocky movie theme came along in 1976.
-
7 months ago
Magnificent Seven Theme
Muzyka z 7 Wspaniałych
Music of Magnificent Seven
sjsjsjssfd • 1,769,558 views
w9gb
commented:
One of Elmer Berstein's best film score (also scored Ten Commandments, To Kill a Mockingbird) ... and this was his known classic.
I always thought this score was a tribute to Aaron Copalnd's Rodeo -- listen to both of them and make your own judgement.
-
7 months ago
AIRPORT(1970)-opening theme
■stereo(URL last "&fmt=18")■
music:Alfred Newman
【cast】
Burt Lancaster バート・ランカスター (Bakersfeld)
Dean Martin ディーン・マーティン (Demorest)
Jean Seberg ジーン・...
ostmusicmix • 100,438 views
w9gb
commented:
Alfred Newman's last score .. and listen closely -- can you hear the tribute to Gershwin and many others that inspired his work -- throughout the score.
-
7 months ago
Towering Inferno - Opening
Towering Inferno - Opening
creativelocation • 7,019 views
w9gb
commented:
This 1974 classic is one of the best film / music opening sequences in the 1970s.
Star Wars and Superman would come 3 years later to equal its achievement.
John Williams scored all 3 of these movies.
What can I say .. Steve McQueen and Paul Newman as Co-Lead actors and northern California locat...
-
7 months ago
Banacek Opening
The beginning of Banacek episode "A Million the Hard Way" starring George Peppard
ClusterPhobic • 101,966 views
w9gb
commented:
Matt Damon needs to pick-up this franchise (movie, special, limited series)
Perfect fit -- Boston background and be a modern day Banacek.
gb
-
7 months ago
What a Blown Dual Capacitor Looks Like...
Combination Dual Capacitor for Condenser Fan Motor & Compressor.
OcRefrigeration • 98,566 views
w9gb
commented:
All capacitors have a limit life (measured in hours of usage).
Cornell Dubilier (CDE) -- USA mfg. -- has great Applicaiton Notes and Product models for the HVAC and Motor technician.
w9gb
-
7 months ago
Capacitor Replacement Tutorial
Afroman goes over some basic information about capacitors: Capacitance, voltage ratings and polarity. Once you know what you are doing, you can rep...
Afrotechmods • 610,129 views
w9gb
commented:
That approach has been used for decades.
For PC motherboard replacement (2002 capacitor plaque) or other applicatons -- leading spacing can be critical for proper fit (enough physical space for replacement).
w9gb
The Dell PowerEdge 1400 can run Windows 2003 and Ubuntu 10.4 LTS.
I run both OS on my 1400 server .... which has 2 GB and dual 1 GHz processors
Search on Ubuntu Dell forum (2009) for proper setup and tweaking for the Ubuntu 8.04 LTS Server edition.
==
BW, the reason Data Monger made no progress -...