Uploaded videos
1-10 of 37-
Honda GX25 No Caburettor
w1ngsfly
618 views
My friend found this engine in a scrapyard and we decided to clean it out, reassemble, and attempt to run it. Inside I found that there was moderate bearing wear and unfort...
-
Magnetic Lightswitch Control
w1ngsfly
363 views
A very complex device designed for nothing more than toggling a run-of-the-mill light switch for household use. The circuit in the video allows remote control of an existin...
-
Rotary Digitizer Control
w1ngsfly
359 views
Here we have a jog dial from a video machine which I've taken apart. It provides a quadrature resolver output (sine waves 90° out of phase) which can be used to control di...
-
Flying Volt Meter (Quiet Version)
w1ngsfly
2,672 views
http://wingzero.ath.cx Check under Projects.
Here again is my flying voltmeter project but this time with a much quieter motor. I'm running the internal clock in such a wa...
-
Flying Volt Meter
w1ngsfly
3,986 views
http://wingzero.ath.cx Check under Projects.
The next step of development with my BLDC motor controller: I'm using the controller to drive a VCR drum while using new circu...
-
Alternator Motor
w1ngsfly
3,325 views
Here is my recently developed sensorless motor BLDC motor controller (as seen in other videos of mine) driving a car alternator as a motor. I've provided field current by w...
-
Hard Drive Motor Gryo Effects (Sensorless BLDC)
w1ngsfly
1,513 views
With my new sensorless controller design I've been having fun with some HDD motors. Here I'm spinning an old drive at 36V and you can see the gyroscopic effects as I set it...
-
CDROM Explosion Attempt
w1ngsfly
678 views
Here I'm attempting to use my special BLDC motor driver circuit to send a CDROM drive to mars. I was able to get about 20,000RPM but after that the resistive effects of the...
-
Second XJ6 awakening after over a year.
w1ngsfly
1,456 views
I've obtained a second Jaguar XJ6. This one sat for over a year untouched. The coolant, power steering, and brake fluid were just about empty. The fuel pump relay needed re...
-
A fine new year's bang.
w1ngsfly
171 views
Something we filmed blowing up across the street. It was quite loud.
Advertisement










Play all(37)