Sticks
Loading...
13
subscribers
93,521
video views
Uploaded videos
1-10 of 73-
pepper tasting vid.MOV
tokeswithasmile
169 views
A tribute to our friends at HomeGrownUkChili.
This stuff was whimpy. My wife and kids did a taste test similar to the Homegrown videos.
One day we will find one wort...
-
garmas 051.MOV
tokeswithasmile
11 views
The room would not allow me to get the entire project in one picture, so I made a video. This is a floating vanity in stained alder.
www.stickscabinets.com
for more info
-
redneck dryer vid.MOV
tokeswithasmile
65 views
The starter went out on our dryer, so now we push start it. We must be rednecks.
-
cedar bookshelves 005.MOV
tokeswithasmile
31 views
Super shallow cedar booksheleves.
These are 6.5 inch deep solid cedar bookshelves. They are not attached to the wall, rather, they are leaning against it. I have put a ...
-
drill press set up.MOV
tokeswithasmile
435 views
This is a short video about a free solution to an old problem I had. I just take the same hose I use for my router table fence, and hook it on the fence of my drill press w...
-
router table fence.MOV
tokeswithasmile
1,983 views
An update to the previous videos about the router table fence. I now have a dozen or so interchange-able plates for the different router bits I run.
My new router table ...
-
reverse dado setup 007.MOV
tokeswithasmile
69 views
I needed to make long tennons that were 3/4 inch deep by 1/4 inch wide. I make old world style doors with dowelled tennon and dado joinery for a client.
So...
I bough...
-
router table fence 020.MOV
tokeswithasmile
5,775 views
My new router table fence made from 10/4 poplar. That's 2 1/2 inches thick. I drilled a 4 inch hole thru it, and cut an arch into the face of it to allow suction thru the f...
-
router table fence 011.MOV
tokeswithasmile
1,140 views
I made a new beefy router table fence. It has interchangeable face plates for the various uses I need it for. I mostly hand make doors with it. I got a 3 1/4 HP adjustable ...
-
router table fence 009.MOV
tokeswithasmile
2,718 views
I made a new beefy router table fence. It has interchangeable face plates for the various uses I need it for. I mostly hand make doors with it. I got a 3 1/4 HP adjustable ...
Advertisement
Play all(73)