TheTeslaJet's channel
Loading...
127
subscribers
135,886
video views
Uploaded videos
1-10 of 45-
TeslaJet's will be at Britgaskets.com the old site was lost by hosting company failure.
TheTeslaJet
310 views
I am busy re-loading and trying to figure out the new ftp interface so if you have questions or an outstanding inquiry please email steve@britgaskets.com
-
Pre-test of 12 disk 2.02b TeslaJet prototype turbine for car alternator and steam or air
TheTeslaJet
643 views
Tested from 40psi -80psi under steam, sustained 60-120 psi capable with load at higher psi supplies.
http:britgaskets.ca/teslastore.htm
.
For economical use a parabolic...
-
TeslaJet 2.02b Lexan outer bearing cover stripped down rotor test no restrictions
TheTeslaJet
174 views
The Is a turbine for Europe to be sent out asap, the body is unfinished but rotor and spacing is set and outer blocked cover for output shaft still to be attached and tappe...
-
Test run at 100psi stored steam. TeslaJet 2.02 Nikola Tesla inspired.
TheTeslaJet
649 views
Customer deadline met! we will see if Fed-ex lives up to it's promises now LOL! In traditional boiler man style I hit the boiler to get rid of the vibrating and distracting...
-
60PSI first run TeslaJet 2.02 12 disk steam turbine, high speed rpm generator
TheTeslaJet
605 views
For experiments and use with med - small car alternator. I have the pulley guide to turn on the lathe and tap then 3 holes for output side cover Lexan cover and alloy ring.
-
Assembly homestretch for Paris TeslaJet 2.02 stainless rotor project. Removable disks!
TheTeslaJet
358 views
If you want an idea of costs for this please visit my site or pm me.
.
I ended up with an interference fit on shaft that allowed for exact fitting and alignment so collars...
-
TeslaJet 2.02 parts overview and assembly tips, stainless turbine rotor.
TheTeslaJet
304 views
A customer progress report on assembly over next 2 days, testing with steam soon.
.
Parts involved:
http//britgaskets.ca/teslastore.htm
The great thing about Tesla's "...
-
4th Teslajet 2.02 Parts and component cuts for mock-up assembly. Part 2
TheTeslaJet
391 views
We are just picking up where Tesla lest off so each turbine benefits from lessons learned and feedback fro customers and experimentors. I will do my best to assist in any w...
-
4th Teslajet 2.02 Parts and component cuts for mock-up assembly.
TheTeslaJet
216 views
Stage one is cleaning the cut bolt holes with a diamond round file.
Heating the bearing plate to 300f allows for the drop in and temperature press fit of both 608 sealed b...
-
Solar test for boiler and Teslajet turbine, stand required or a barbeque :O)
TheTeslaJet
850 views
Tried to get a sense of hot spot effect on steel. A small steam boiler or doubled layered copper pancake coil painted black leading to a steam chamber is required. This pan...
Advertisement
Play all(45)