The House Blog
Loading...
40
subscribers
63,164
video views
Uploaded videos
1-10 of 115-
Custom Y-6 Multicopter Test Flight
TheHouseBlog
12 views
This is an actual open area test flight of my Y-6 hexacopter design with the DJI-WKM flight controller. I'm pretty happy with the results. Flight time on a 4500mAh 3s pack ...
-
Custom Y-6 Multicopter Build DJI-WKM FC - Turnigy Plush ESC - Turnigy Air 2215J Motors
TheHouseBlog
90 views
A video about my custom Y-6 multicopter / hexacopter build for my blog http://www.jonshobbies.com/ . I designed and cut the frame parts on my DIY CNC Router with 2.2kw spin...
-
Huanyang VFD and Water Cooled Spindle
TheHouseBlog
80 views
My Chinese 2.2kW spindle with Huanyang VFD. Black and red thing stuck to the VFD is the only 10k potentiometer I could find on short notice, it's out of an old virtual real...
-
UCCC Indoor Fly February
TheHouseBlog
18 views
These are just some video clips from the indoor flying at Ulster County Community College in February. Lots of fun and good folks.
-
DJI WK-M Quad Multicopter Flips and Crashes (Defective Turnigy ESC)
TheHouseBlog
40 views
If you watch the slow part of the video you can actually see the front left motor shut down. -- I Took the quad out to the field today to try some outdoor flight. It was pr...
-
Multicopter DJI WK-M w/F450 Frame and GoPro Hero 2 @ UCCC - volume alert
TheHouseBlog
260 views
This may be a little loud in spots. Check your volume. This is my new DJI WK-M Flight Controller on the DJI Firewheel 450 quad-copter frame with a GoPro Hero 2 attached to ...
-
DJI WK-M on F450 Frame Indoors 6 foot x 6 foot Area
TheHouseBlog
147 views
It was dark out, I wanted to test this so I flew it in the kitchen in a small amount of space. It looks a bit unstable right now but this area causes a lot of air recircula...
-
Surfacing CNC Bed 25x
TheHouseBlog
34 views
Surfaed the bed of my CNC router. Took forever. The video cut short, but this part of the video is about 35 minutes worth time compressed 25x. 32" x 30" work area.
-
Twist 60 Front View with Near Wreck
TheHouseBlog
27 views
More GoPro Video from an unseasonably warm Saturday. I cut away most of the flight and just corss faded here and there. Can see where I nearly crashed the plane. Fortunate...
-
Hangar 9 Twist 60 Rear View on GoPro Hero 2
TheHouseBlog
30 views
Just tooling around with my radio controlled brushless Twist 60 with the GoPro Hero 2 pointed backwards this time. I'm really enjoying the video quality of this camera. Aft...
Play all(115)