thehossman1's channel

@rnzafdude (U)tility H(elicopter). Don't forget the Seahawk version.

that rig is just bitchin. LOVE R models. Buddy o' mine used to clean trailers back when I was 18 and he got to use a mid 80's R to move trailers around, first ride a big rig, a Mack, and an R. conned me into hooking up a CD/radio in it for the rides.

reminds me of 20 odd years ago growing up driving past the Roadway terminal going into the city and seeing all the Ford C-liner rigs parked around. Could see that even into the late 90's.

uuuuh. I wish I had 2800 bucks to get my CDL

To clarify for others D= direct O= over (gear split)

in low range Low D= 1st, Low O+2nd, 1 D=3rd, 1 O=4th, 2 D=5th, 2 O=6th, 3 D=7th, 3 O=8th, 4 D=9th, 4 O=10th, in high range 5 D=11th, 5 O=12th, 6 D=13th, 6 O=14th, 7 D=15th, 7 O=16th, 8 D=17th, 8 O=18th

is the helper crane a 555?

I hear it both ways for someone still kind of interested in getting CDL its still confusing. So far only thing I've heard EVERYONE say is instructors REQUIRE you to double-clutch.

@elkvis either 745 or 754 watts/horsepower, I always get it mixed up. i also heard once that the diesels needed superchargers just to push air into the intake so it could run, don't know if thats true or not

I would like a supercharged 502 with a ProCharger on street gas plez yes I will take the 1000 horsepower with that.

turbo's create pressure not vacuum, moe-sler

@RyanMoran1992 13 years ago>>1998 or 1999. They were around by then. Porsche had them a few years before that, I was comparing to a 30 years ago, not 13. Even about 10 years ago TCI made a kit that replaced your trans computer in Gm 4L60E/80E programmed for full manual shift mode and included a c...

one question really. do you give rides? I've seen Cubs up close, have loathed at the one in AirVenture, but have never sat in one or flown in one. Then again I haven't been in a plane for a good 12 years. Cessna 172, if you count when I was 6, second time I flew one.

@Kyheem25 typical 6 axle locomotive is around 370,000 lbs, heaviest are around 400 000 lb, sounds like your the ass bitch. a 440 000lb engine will squash most rail. i don't think that car is 98 000 either. empty car is around 63 000- 64 000 lb.

so just so not all comments are made by total idiots:

totally support breast feeding. like you said its completely natural, and with all the toxic harmful crap out there now a days i dare say a bit safer. a little ironic the u.s. seems to be slipping into a bit of an organic craze, yet this is st...

sounds like most of the viewers that never watch anything but porn and cant keep their hands off their dick. too bad america is too afraid of skin to show something like this. half of everything would have been pixelated out. damn fcc, grow up, the rest of us have.

I remember growing up a teen in mid 90's hearing this once in a while on oldies radio station. took me till high school to find out the story.

"Why she had to go, I don't know..." how is that not fitting. I see the Arthur M. a few times a year in port call here. I knew the story of the Fitz but never figured this was the one and same A. M. Anderson, until a recent book purchase about the wreck. I see her in a different eye now.

I would rather have spent my time taking more video and stills to help figure out what happened. I am enamored by the Fitz but I wouldn't take anything from it. It is sad to see this pillaging. Even more sad to hear the idiots talk about illegality of the act and say "fuck it shoot it". Self incr...

@asre2001 supercharger is driven directly from engine uses power. put to fans facing each other plug one in turn it on both fans will spin. super is like plugged in fan, it uses power. turbo is like free fan, uses air flow from plugged in fan to spin. also basically how a torque convertor works.

so you just decided to replace "noisy" lifters or did you actually look at the cam. the roller and the lobe touch each other ya kno.

looks of things the rocker was sitting at or near peak valve lift which is NOT the closest clearance. closest clearnace would be around TDC area when valve is coming down and piston is coming up on TDC or just starting on its down stroke from TDC. could have also used a perimeter plate but with t...

its pronounced mani-toe-walk there buddy. those are probably my fav of your collection.

whats the building in the back ground? i know i have seen the tank piece in a few of your heavy-lift stop motion videos. am looking at the RT 130 or RTC 80130 you show for my first crane.

did that fucker just do a cobra roll in a blackhawk??

@InfiniteMushroom if they make it that easy I don't want a damn radial. If I could, I would steal this plane. I wouldn't get to far since I don't know how to start it, but maybe the pilot would feel sorry for me and give me a flight instead of turn me into the mounties.

they don't bend they just look like that because the props are spinning faster than the camera can record. now what do i have to do to get a ride in this thing. i only found out the existence of it in spring from drawings on a website and have been enamoritley fascinated since. yes, i'm so overta...

@6Vendetta666 they are called bobcats, skid steer, skid loader. bobcat comes from original manufacturer BobCat, skid steer comes from way they steer. if you go left left side wheels lock and right side keep turning, sort of skids along. operated one when i was a kid a little bit. farmer joe made ...

You did more than what was needed just to 'get the 882 heads to run in a vehicle'. You say yourself you guys did a performance build on them. Costs still outweigh the benefits although. Personally I would rather go with aluminum Eagles.

this video just made me subscribe. i do believe in one other video of yours i left a comment sarcastically calling you a dork. i totally and completely take that back. this is just mind blowing. now i want to do the same but with much smaller scale.

shit its the terminator theme song!

you're a dork, lol. but seriously i would love to have some of these things, like this and your 18000. who make all these and where do u get them?