taurustbolt's channel
Loading...
41
subscribers
41,767
video views
Uploaded videos
1-10 of 64-
Mark's 3rd Try at Quadcopter Videos...
taurustbolt
2 hours ago
This time I cured the oscillations with a lighter, larger wood frame. However, a new problem has arrived...wavy picture quality. Maybe the wood is flexing or those landing ...
-
Mark's Second Attempt at Quadcopter Videos - still rough
taurustbolt
24 views
1 day ago
Here is my second Quadcopter in-flight video. I can't seem to get the oscillations to go away while still being stable...I'm going to make another frame with longer arms......
-
Mark's Quadcopter Video with GoPro and HK KK V2 controller
taurustbolt
38 views
2 days ago
I've ordered some 8x4.5, 8x4x3, and 9x5 props to try. Right now I'm hovering at 70% throttle, and can't seem to dial out that oscillation in the video. The moderate wind co...
-
Flybarless Slop with DS610M Servos on Trex 600N
taurustbolt
73 views
1 week ago
Is this an acceptable amount?
-
Sloppy Cyclic Gears on TGY-2216MG Servos - HK450 Flybarless
taurustbolt
56 views
2 weeks ago
Do you think this is too much slop? I had to reduce the Gyro Total gain from 40 to 25 to eliminate the shakes/shivers that would show up when doing a slowly descending hove...
-
RJX Flybarless Head on TREX 600N
taurustbolt
45 views
3 weeks ago
I found the linkages that came with the kit to be too loose on the stock Align 600N LE swashplate. I'm adding some larger diameter balls to remedy. The radius arms are atta...
-
Eflite Blade Helis for sale - mcx, mcx-t, 120sr
taurustbolt
22 views
1 month ago
Test flights prior to shipment
-
TREX 600N FBL - Testing for vibrations CX-3X1000
taurustbolt
575 views
1 month ago
This time I used two layers of 3M 411 tape, a metal plate, then a single layer of 3m 411 tape under the flybarless gyro unit. I think the swash servos are dancing less than...
-
Trex 600N FBL - Swash Dancing
taurustbolt
90 views
1 month ago
Does this mean I need more foam under the FBL gyro unit? CX-3X1000
-
Jittery servos with CX-3x1000 and program box PB001
taurustbolt
302 views
1 month ago
Is this ok/normal? Note the jitters go away after the PB001 is unplugged.
DX7 with AR6100
HK450 Pro (originally belt tail) with EXI TT tail added
Club Heli red FBL head
C...
Advertisement
About taurustbolt's channel
more
less
Play all(64)