tansit2344's channel

The way God and John Moses Browning intended.

I'll take that rack behind him at 1:57, but what kind of sub gun is that at 2:08?

Thank you collision detection software!

now with infinite tool life...oh wait.

3 degree ramp? ouch.

@grtyuj Do you want to drink my butt blood

Sellier and Bellot runs great in my PF9 but Rem UMC is one fully extracted and ejected case every other magazine, in other words every last UMC jams.

I've got an old Lafrance/Smith straight flute vortex and that sucker will ring for a good 20-30 seconds on a 14.5" Colt barrel (yes its silver soldered with 1200deg paste). So between that and the sproing from the recoil spring there are all sorts of bizarre noises. Rings pretty loud after firing...

@HolinessWarrior Sand falls out the same way it falls in. Also the sides of the bolt are recessed so only the edges contact the receiver and the corners are chamfered.

lol, I would totally daily drive this thing.

@newin10 I live near Richmond, VA. There isn't really anything special about the C93 sporter. You could have one shipped to any dealer, run through the instant background check and have one inside of a week. The only permits Virginia has are for carry of a concealed handgun. NFA regulated items a...

Nice advertisement by NatGeo. All I wanted to see was the stamping and welding.

I think a lot of cops only shoot when they are required to qualify annually, aside from the badge they are ordinary people so how is that any different from your average joe? I live fire practice at least every 4 weeks and usually every 2, so whats this about CHP holders not practicing? Holster a...

Just to throw a wrench in the works there is the Colt "J" frame which is more like the S&W "L" frame....I just want affordable grips for my 2" Lawman Mk3. Curse you aftermarket!

I consider the AR-15 to be the best rifle from a design and accuracy standpoint, it may not be the best as a COMBAT rifle for those who want to moan about reliability. My friend that's back from Afghanistan said no matter how much you clean the rifle the nuisance dust in the air will clog them up.

Still got that buffalo target to the left of the bowling pin/ red square?

@hickok45 If you're looking for an SKS peep sight I would recommend the Williams sight. It could use a little loctite but the apeture is a good size and the hood isn't too big. Might be a bit of a pain to install the roll pin over top of that spring though.

Nice report on that thing.

If you remove the disconnector from a semi-auto AR-15 all it does is let the hammer ride the carrier down. With an un-shrouded firing pin it would probably jam. With a proper shrouded pin it just decocks without the firing pin actually being struck.

Very true, people who have not shot are the ones that don't like it. Between getting people in on the ground floor (22LR?) and a good education in firearms I think a lot of opinions about "dangerous handguns" or "assault weapons" would change. I like video games as much as the next 22 yo guy but ...

@hickok45 I think some of the Knob Creek guys might build a dual Benelli mount now - like they did for the dual Ruger 10/22 with anti-aircraft sight and hand crank triggers.

Great execution of the idea. Considering you can get a used B grade engine as little as $400 that beats the heck out of a $2500 B&S or Honda V-twin 20hp.

$360 one mag, Aim Surp, 9 or 40. That's cheaper than a Bersa 9UC.

@hickok45 Better than television.

A very well put together rifle and the G2X pro is about the best deal out there for a tac light. I was given a Surefire M951 weapon light (by the person that permed my F/H) and honestly I'd rather have a regular light for the versatility. Always good to see women getting into the shooting sport!

@coheedatreyu Why pick one or the other? My pop and I have both. I will say I'm better with the Hi-Power, especially without the mag safety giving the trigger some crunch. However I think the CZ-75 has smoother recoil and I don't have enough practice with it.

In the future I wouldn't compare too much to another gun, because people won't always have handled the gun you are comparing to. I see way way to much comparison to Glocks but not everybody has shot one, or like me, I wish I could like Glocks because I'd be set. I think Gaston Glock screwed up on...

Did you drill a hole in the end of that log? or just pound that barrel into it?

I've only been programming for a couple months (hand and CAM) and I want to punch out the programmer of this one, you're gonna wear out that machine right fast that way and heat it up too. Back and forth between pockets and not putting the finishing tools at the end of the cycle. Yah I counted ab...

@snshampton Ordered one M44 the second I got the sale email.

I never said I'd buy a bench loader, plus the stripLULA is handheld so I'm sure its not fumble-proof. People were just wondering why such a product exists. Also if that bench loader is milled from virgin cast plastic, that hunk of plastic alone is a couple hundred bucks. Plus CNC time at about $1...

Marcus Gronholm looks bored. Probably because he's not dodging huge pine trees or sheeple.

Lousy range, heavy weight, and stupid price tag aside - DC motors have full torque at the very low end, like 100 rpm. Something combustion engines can't do since their power curves are basically backwards from electric.

Except combustion does everything electric can't, which is why we still use ...

Does is have a trigger disconnector? or does it just decock if you hold the trigger and cycle the slide?

learn 2 mouse. I warm up on this one.

Where can I get one of these diamond shotguns.....