stihlhead1's channel

The champagne has been popped and the confetti has, hopefully, been cleaned up but that doesn't mean it's too late to make some serious green resol...

Alternator Welding

The new ETS wood gas electric generator has passed all design specifications and initial performance test runs. The generator will start easily on ...

Seeing the need for a small crusher for concrete and building waste and aghast at the cost of a factory made machine, I decided to build my own at ...

Building a wood gasifier to run a generator to peoduce electricity

Katie's family comes over to try out the new apple grinder and press that Jason built. This video shows the family harvesting, washing, grinding, p...

Today we are launching the first segment of a series of videos called "Ivanpah Portraits," designed to showcase the great work happening at Ivanpah...

A short trailer for the double DVD produced by The Crowood Press entitled "Artist Blacksmithing".

This is available for purchase at www.crowood.com...

It's running on 90psi air. The rpm's are around 1300. I will be running it on steam in the near future. I will also work on very detailed plans for...

this will work on any propane tank with this top on it

hear is the link http://cgi.ebay.com/ws/eBay......

if you have any Q's leave a coment =)

Elbow engine running at different speeds

this is my first engine and was made

mostly from scrap materials.

cylinder and slide valve housing is made from from 1/2" pluming fitting.

in the...

Video of Compressed Air Gasoline engine. One cylinder uses gasoline and operates like a gasoline engine and the other compresses air that is return...

oscillating engine

1st running after 7years building, 5 and 3 inch compound steam engine for marine use upto 30ft hull length.

"Home made steam engine" "homemade steam engine"

First engine I ever built.

Built in a month of spare time, with no lathe.

Double acting, and rev...

"Spanish Johnny drove in from th underworld last night..."

The definitive 'Incident On 57th Street'.

Taken from an FM broadcast on WMMR radio in Philadelphia on February 5th 1975 at the Main Point Club.

N...