seawalkersee's channel

What are the gains of the navi cams over the cobra ones? Since they are B heads, they should put more favor on the exhaust.

So...is this car B headed? Who made the intake?

When he was bliping the throttle, all I could think was "thats the shortest dyno run ever.

@guppyelf Thanks for making me jellous. I am still fighting problems on mine.

Sooo...in the last video there is something about the need for a scatter shield. In this car...same engine, welded block, also a clutch....NO SCATTER SHIELD.

Add some more boost or more fuel and it will cure that lower power thingy.

Wow...that is actually kind of impressive.

Do boats use power steering? I see a sag pump on there and have to wonder why.

Not sure where they are the thinnest, I just made it as smooth as possible by getting rid of all of the casting flash, and did some bowl work. You can see it on my chanel. Also, the 6.9 heads do not work on the 7.3 without machine work. FROM WHAT I HAVE READ, you are better off getting a set o...

Just a little to add to this. The bottom end of the powerband feels stronger that it did before the rebuild. I am still working on certain things and the setup is different than it was prior to the build. So, I am not sure how much is from the cam, port, fresh bearings/seals, IP, or the small ...

Do those mirrors just bolt onto the Ford mount? Did you make the bumper or purchase it.

That is pretty slick. Amazing if you will for that much weight. Are we going to get to see any underhood shots?

Kakow cracka...

@BaNiVoRbEsC So they had to explain what you can not see in complete sentences to people like you, and confuse you even more.

What size pully did you use?

They both suck...that guy on the bike was right on their backs. If he hadn't been winded there at the end, he may have taken them...

What mods do you have to that?

@JEDIHAMSTER101 Ok. So you graduated. You still have no clue about the human mind and the way it works. Beauty and humor are both in the eye of the beholder. As Tom Green would say, "Unleash the fury Mitch..." Yeah, its just low life rednecks who are knuckle dragging slope heads. If we only...

@Gxr Not quite true but you will believe whatever you want instead of going into it with an open mind. Do some research and you will find an article or two by Yates who has even run a set on a SBF.

I hate to see this one go. What all mods were done to it to make 2 tons with a factory t-body run 12s?

More than 3 min into the vid before I see a rice killer...None the less, not my cup of tea as I am more of a "function before style" kind of guy and am too big for most cars. BUT, the vid editing is amazing for what it was. What did you use to film this? The camera seemed steady for the most p...

So...what did it put to the tires and what did it run?

Is that a "B" headed 5.4? What cams are you using?

Bolt on Mark VIII? What kind of bolt ons for both?

I would like to see more. Just sayin, it looks different.

Figured I would hit it here since there is no response on Corral. Updates?

So....what is it? 400" with a medium sized cam 4.10s and a 3500 stall?

I have a buddy that ran for several years in his Mercedes. He said after a while (unrelated problem) he pulled the engind down. The glycerine had built up on some of the internals. I think you could probably run some diesel and water to clean it up if you did it every 10th tank or so. BUT tha...

Wow...okay. I wrote that and posted it while I was being distracted by my child. I went back and looked at it and saw my post was wrong. Delete it/them if you will so I can not clutter your responses...Sorry again.

How many psi?

SWS <3's Cory's ability to 4 wheel.

Yeah...you are right. There is no need for a "dialed in combo" that obviously works. Guess you think the top fuel guys are stupid too.

Gheyness...just give it to me so you don't have to look at it anymore. Looks good. Is there a build thread on it somewhere? I can't remeber where the compressor is for the AC. Did you keep it or delete it since you are in AZ?