-
1 day ago
HAND FORGED CRUSADER SWORD
I take great pride in creating one of a kind edged weapons, every piece I make will be unique to its owner. All the swords that I hand forge are ma...
9,310 views
saxonforge
uploaded
-
1 day ago
saxonforge
commented:
-
-
2 days ago
Zombie Apocalypse Time!!!
Hard to just choose 5 things, who makes up these friggin' rules, lol...
cutlerylover • 71,336 views
saxonforge
commented:
The hot sauce is best idea I've heard so far and I agree with you on the revolver. It drives me nuts when jamomatics do their thing.
-
1 week ago
1873 A Firearms Bonanza!
1873 was a ballistical bananza, a watershed year in firearms and cartridge development.
Things I should / could have mentioned in this video:
The W...
hickok45 • 107,215 views
saxonforge
liked
-
1 week ago
saxonforge
commented:
I could never understand why the pistol has the loading gate and ejector on the left side. If they ere on the other side you could eject and reload while still holing the gun in your shooting hand. If anyone has knows a logical reason for it I'd be glad to hear it. Seems like a left handed gun, l...
-
-
2 weeks ago
Double Rifle 4 Bore 2
Cal Pappas shoots a 4-bore Thomas Bland with 14 drams, 385 grains of FFg GOEX powder, 2100-grain bullet at his shooting range in Willow, Alaska.
wankell • 125,278 views
saxonforge
commented:
Can you give us any solid ballistic on this thing or do we just go by your laugh. I reload and shoot both smokeless and BP. Black powder follows a law of diminishing quality, there is a max muzzle vel with a certain amount of powder. Any more powder used after that point is a waste, more boom may...
-
2 weeks ago
Testing T-Rex!
Shooting the Mighty 4 Bore Double Rifle!2000gr jacketed bullets that are 1" in diamater(100 Caliber) also called a 4 gauge,but it is Not a shogun.....
TOMCAT1955 • 1,789,499 views
saxonforge
commented:
Guns like this were probably conceived and successfully sold to rich guys going on safari way back when you could shoot elephants tigers, rhinos etc. Its been proven since the muzzle loading era that all of the above game can be easily taken with much less than this obnoxious monstrosity. My opi...
-
2 weeks ago
Long Range Shooting 22 LR Rimfire 400 Yards Savage Mark II BTVS
Shooting my Savage Mark II BTVS .22 LR at 400 yards. Target 24"x24" Steel Aug 2 2009. EGW Picatinny 20 MOA Rail
hifly78 • 422,400 views
saxonforge
commented:
Nice rifle but you do not tell us what sort of grouping you achieved. " hit. hit " means absolutely nothing. that looks like a 36 inch target.
-
1 month ago
45-70 reload
Reloading for my Marlin 45-70, useing the Lee kit, Speer 400 GR Flat Nose bullets, and Du Pont IMR 4227 powder.
logcabinlooms • 8,702 views
saxonforge
commented:
@logcabinlooms Absolutely, I down play my first hand loads as medium but in reality they are what Winchester gives you and were powerful. With this simple kit you will be able to duplicate loads that some manufacturers sell for over $100 a box. Now I can decide weather I want deer or Godzilla mea...
-
2 months ago
saxonforge
liked
-
-
1 month ago
Guy gets in trouble at the gun range.
Listen to the range master at the end of the video. Listen closely at the end.
huntertheman1243 • 192,084 views
saxonforge
commented:
@19thSFGA HOLY FUCK, That level of ignorance truly stuns me. Canadians have all kinds of firearms and most practice regularly at the range. This might shock you but we also have handguns and know how to use those as well. Really man, educate your self before posting shit like this.
-
1 month ago
Marlin 1894 Cowboy Limited .44 Magnum
shooting the marlin 1894 cowboy limited in .44 magnum,lever guns fun to shoot..some slow-motion at the end..enjoy
phishst1cks • 852 views
saxonforge
commented:
Great video and shooting, is that ammo commercial or did you load it. Judging by the sound and recoil It appears to be very hot.
-
1 month ago
BULLET CASTING
casting bullets for the 45-70 with a lee mould
MrMat4570 • 782 views
saxonforge
commented:
Great video, I just started reloading for my marlin guide gun but also want to start molding my own. Can you tell me if those pucks are pure lead or do they have to be alloyed with something else. Thanks in abvance
-
2 months ago
Hand forged Celtic sword
I take great pride in creating one of a kind edged weapons, every piece I make will be unique to its owner. All the swords that I hand forge are ma...
1,879 views
saxonforge
uploaded
-
2 months ago
saxonforge
commented:
@GoldenAxeVox666
Thanks for viewing, yes and yes. This one is available on gun broker.com. I'm not taking commissions at this time.
-
-
2 months ago
-
2 months ago
HAND FORGED BOWIE: MOUNTAIN MAN
I take great pride in creating one of a kind edged weapons, every piece I make will be unique to its owner. All the knives that I hand forge are ma...
7,407 views
saxonforge
uploaded
-
2 months ago
saxonforge
commented:
@faultr 16 inches over all forged and properly tempered virgin 5160 steel. Blade is 11 inches x 1/4 inches thick x 2.65 inches wide at hilt . temper is triple drawn from spine to edge . Spring temper for spines with harder edges on all my blades, I auction them on gun broker .com . thank you for ...
-
-
5 months ago
HAND FORGED BARBARIAN SWORD
I take great pride in creating one of a kind edged weapons, every piece I make will be unique to its owner. All the swords that I hand forge are ma...
945 views
saxonforge
uploaded
-
8 months ago
Hand forged mountain man bowie knife
I take great pride in creating one of a kind edged weapons, every piece I make will be unique to its owner. All the knives that I hand forge are ma...
6,026 views
saxonforge
commented:
@BrotherIan Thanks for viewing and for the comment. I am very fond of guard-less Bowie knives because of their handling characteristics. I will be offering a variety of similar knives in near future.
-
8 months ago
APOCALYPTIC ZOMBIE AXE
I take great pride in creating one of a kind edged weapons, every piece I make will be unique to its owner. This
Axe has a very sharp edge and thi...
742 views
saxonforge
uploaded
-
10 months ago
Lee Enfield SMLE and Mauser K98k compared
A visual comparison of a 1941 Lee Enfield No1 MkIII* SMLE and a Mauser K98k. Different views are shown to compare and contrast these rifles, which ...
Jollygreenslugg • 302,846 views
saxonforge
commented:
@Stugace Must be my Mauser then, I should not have assumed they all have stiff safety levers.
-
11 months ago
Webley-Fosbery Automatic Revolver
Webley-Fosbery Automatic Revolver(Japanese version)
pochitantei • 58,617 views
saxonforge
commented:
@FieldMarshalB Two tone firearms are about as ugly as they get, I,ll take good old fashioned blue anytime because they look great especially when they start wearing. Like most guys I love mechanical things and I'm intrigued by its action but I agree the price is too much and I'm sure there are c...
-
1 year ago
flint lock and char cloth
using the flint lock to start your char
bigskytrapper • 8,347 views
saxonforge
commented:
Great way to do it, thanks for the video.
-
1 year ago
forging a nail
Me forging a nail out of a bar of steel.
blacksmither1 • 253 views
saxonforge
commented:
@blacksmither1 No a good solid platform will actually deaden the sound and when you forge at the highest heat possible ( which you should ) the sound will more resemble a loud smack. The high pitch bell like ring is more of a cliché associated with the blacksmith. A good hardwood stump of maple o...
-
1 year ago
Hand forged bowie knife : Large frontier style bowie
I take great pride in creating one of a kind edged weapons, every piece I make will be unique to its owner. All the knives that I hand forge are ma...
4,172 views
saxonforge
commented:
@blacksmither1 Thank you for viewing and for the comment.
-
1 year ago
Gunblast.com - Marlin 1895 SBL .45-70 Lever Action Rifle
Jeff Quinn (www.gunblast.com) tests Marlins New 1895 SBL .45-70 Lever Action Rifle. For more info, go to http://www.gunblast.com/Mar...
Gunblastdotcom • 241,637 views
saxonforge
commented:
Thanks for all the excellent videos, they are very informative. I got my 45-70 guide gun 2 years ago and am in love with it. Where we hunt there is a lot of heavy bush so its absolutely perfect. I am very happy with hornady lever rev. ammo because its got more than enough power but I do wish th...
-
1 year ago
45-70 derringer
45-70 derringer 325gr the most powerful smallest hand gun in the world...
davegunman • 169,573 views
saxonforge
commented:
@ionz75 I agree but the idea may have been to make a back up that chambered the same round as your rifle. this is a very popular big game round so this firearm might be attractive to hunters, thus the name survival gun.
-
1 year ago
Hand forged D-guard Bowie knife
I take great pride in creating one of a kind edged weapons, every piece I make will be unique to its owner. All the knives that I hand forge are ma...
1,160 views
saxonforge
uploaded
-
1 year ago
saxonforge
commented:
@CobblersThumb Thank you for viewing and for the comment. There are many more detailed photos and specs on gunbroker
-
-
1 year ago
Sawed Off Shotgun, Dominion Arms Outlaw 12 gauge
This is my short review of the Dominion Arms Outlaw, a 12 gauge double barreled shotgun with double triggers and exposed hammers made by norinco in...
BobbyIronsights • 219,044 views
saxonforge
commented:
@BobbyIronsights Thank you, I was about to place an order with track of the wolf for a bunch of stuff including round ball molds for my new musket so I'll throw that one in as well.
-
1 year ago
Home made Matchlock Musket
This is a hand made .75 caliber smoothbore Matchlock Musket shown from start to the first firing, taking one month to make.
The Barrel is a 1710 Du...
DecimusMaximus • 67,308 views
saxonforge
commented:
@DecimusMaximus Thank you, I've been shooting traditional flintlocks for years but just got a 60 cal French hunting fusile ( replica ) musket. The versatility of smooth bore firearms has always impressed me. For your next project you should go further back in time consider a medieval hand gonne, ...
-
1 year ago
MVTCO Double Barrel Flintlock Pistol
Shooting a double barrel flintlock pistol
soheiladib • 25,551 views
saxonforge
commented:
@soheiladib Thank you, I heard that you could import non firing replica antiques without registry but did not believe it until I spoke with the CFC. Was it a big deal to vent and register it after you imported it?
@SirSlaughter357 Thank you for viewing, yes I get questions of this nature quite often. I took a basic 2 day blacksmith course and shortly after the same for knife making.These were held about 2 hrs drive from the city and just taught bare basics.That was 24 years ago so I have evolved a bit sinc...