-
rce2win commented 1 year ago
2002 Dodge Intrepid LED Tail Light Mod
Swapped out all the stock bulbs for LED bulbs and added a "few" extras to the 3rd brake light and turn signals. The outside running lights are 194'...
@dsummers2006 Thanks, got it handled. Actually, i'm running an electronic turn signal relay from TMI that takes care of the issue. I didn't mind the fast blink, but i had to swap the relay once i started running LED's all around.
-
rce2win commented 1 year ago
@pathak130
i got mine from the seller PLASMALED on Ebay. Prewired and ready to go. The other brake lights are just LED replacement bulbs from Jamstraight. There are plenty of LED bulb suppliers out there, just have to find a good quality one for your ride. Autozone actually carries the Jamstraig...
-
rce2win liked 1 year ago
-
-
rce2win commented 1 year ago
2002 Dodge Intrepid 3.5L S/S Magnaflow Exhaust
Don't mind the tip...i have a new one in the trunk ready to replace the stubby one. Sounds a little "poppy" b/c of the rev limiter. Has a much nice...
@AMTrombley0924
I picked up the muffler slightly used for $35 on Ebay and had it installed at a small local muffler shop. Unless you know someone there, don't take it to a big name exhaust shop b/c they'll try to charge you a ton of money to install it. The shop i go to, the guy really knows his...
-
rce2win commented 1 year ago
2002 Dodge Intrepid 3.5L S/S Magnaflow Exhaust
Don't mind the tip...i have a new one in the trunk ready to replace the stubby one. Sounds a little "poppy" b/c of the rev limiter. Has a much nice...
@AMTrombley0924
The front resonator that collects the 2 down pipes from the manifolds is still in place. I cut out the stock muffler and rear resonator (which is what your stock exhaust tip is connected to) and replaced both with just the SS Magnaflow muffler and tip. Hope that helps.
-
2002 Dodge Intrepid LED Tail Light Mod
Swapped out all the stock bulbs for LED bulbs and added a "few" extras to the 3rd brake light and turn signals. The outside running lights are 194'...
43,312 views
rce2win said:
@RMasters2007 You are correct...in some aspects. When this video was shot, the rear turn signals consisted of (10) 5mm amber LED's on each side, but i was still running standard filament bulbs in the stock location. With your vast knowledge of LED's, i'm sure you know a full LED system requires a...
2002 Dodge Intrepid LED Tail Light Mod
Swapped out all the stock bulbs for LED bulbs and added a "few" extras to the 3rd brake light and turn signals. The outside running lights are 194'...
43,312 views
rce2win said:
@UBETTERPRAiZEHiM011
License plate light is custom. It's a series of white LED's mounted through a 1/2" thick piece of plexi that mounts using the existing holes in the rear bumper cover. Pretty sure there are pics of it up on my Cardomain site.
+ View allshow less