rcAllDayLong's channel
Loading...
96
subscribers
213,074
video views
Uploaded videos
1-10 of 58-
Air Hogs Wind Flyers conversion to 3-ch
rcAllDayLong
156 views
Air Hogs Wind Flyers originally came with a brush motor and nimh. You would charge up and toss it and it would fly till the charge was out.
I wanted to see if it was pos...
-
External UBEC "How To"
rcAllDayLong
125 views
A fellow youtuber asked me to put this vid together...
This is a quick "how to" on hooking up an external UBEC to your existing ESC, which basically bypasses your internal...
-
multiplex fox conversion to 3-ch RC
rcAllDayLong
114 views
This thing is fast and super agile...just a blast to fly
Multiplex fox glider conversion setup:
9gram hxt motor (is now discontinued)
1x 5gram HXT500 servo
1x 4.3 H...
-
Estes 747 Presidential Jet to 4-ch RC
rcAllDayLong
150 views
this is the Estes 747, now discontinued
I obtained this Jet from a flying buddy in a trade many years ago and finally got around to converting it.
motors are all stock ...
-
Parkzone Ember w/custom flashing LEDs
rcAllDayLong
66 views
I salvaged a couple of LED lights from my micro heli and to my surprise the LEDs did not required anything to flash red and blue.
Since it does not require anything, the...
-
Air Hogs Wind Flyers- going, going, GONE
rcAllDayLong
1,900 views
Air Hogs Wind Flyers
Free Flight foam plane with a small 1 cell nimh and a geared brushed motor
it is roughly 22.6 gram on my scale
Maiden flight consist of a 50 sec c...
-
Spektrum DX7 DSM2 upgrade to DSMX
rcAllDayLong
395 views
I decided to get the DSMX upgrade.
Unlike the DX8 where only a firmware update is required, the DX7 actually requires a hardware swap out. It looks like the RF deck was swa...
-
Hot Glue quick fix without the gun
rcAllDayLong
142 views
Here's a quick tip if you're stuck at the field without any other means. It's a quick fix, not as pretty, and heavy, but it gets the job done
-
How to Ream a prop, well sorta
rcAllDayLong
116 views
For those that do not own a real ream tool like myself, but do own a drill set, well, watch- Put those drill bits to work
-
Brushless motor reassembly and test run
rcAllDayLong
111 views
Final video of Brushless motor reassembly.
Advertisement
About rcAllDayLong's channel
more
less
Play all(58)