parkfly27's channel
Loading...
8
subscribers
12,652
video views
Uploaded videos
1-10 of 22-
22nd Arizona Jet Rally
parkfly27
76 views
Short slideshow and some video of the 2010 Arizona Jet Rally. Team Futaba put on the aerobatic show. Video isn't the best because it was taken with my coolpix digital camer...
-
115 MPH Funjet
parkfly27
328 views
Flying my funjet with a 5-cell LiPo and a onboard camera and including rear-facing footage. Watch it in full screen and 480P. it's a rush! And please be sure to vote for my...
-
Funjet looking back
parkfly27
35 views
My funjet with the camera mounted looking backwards. Again using the turnigy DigiCam from hobbyking.com and the 4-cell lipo. Video with the 5-cell lipo coming soon!
-
Funjet forward view
parkfly27
14 views
Trying out the turnigy DigiCam with it mounted slightly higher so you don't see so much of the nose. The video randomly cut out and resumed about 15 sec. before landing.
-
Jim's glider w/ turnigy 30FPS DigiCam
parkfly27
28 views
I had the idea of strapping my turnigy camera to my buddy's glider. The video got cut short because i keep forgetting to erase the videos after i put them on my computer, a...
-
1/4 scale extra e-powered
parkfly27
150 views
Aerial video taken from my 1/4 scale extra 300. The monsterPower 160 motor by Exceed-RC and the Flightmax 5000mAh 10S lipo really make it move! And the Turnigy Sentillon 10...
-
Funjet second flight with camera
parkfly27
46 views
Second flight of the funjet after my bad landing and repair. Needed lots of trimming!
-
Funjet with a Turnigy 30FPS DigiCam
parkfly27
158 views
Multiplex Funjet with a Turnigy V-Spec 2150 K/V inrinner hybrid motor and a flightmax 4S 2200mAh 40C lipo. It only pulls 22A and flies very fast. Those turnigy motors are v...
-
70MM F-16 control test
parkfly27
637 views
I modified the Banana Hobby F-16 to put both flaps down when pulling up, increasing lift. To do this, solder one flap servo on to the opposite elevator servo wire. You will...
-
SHAFT 25 aerobatic flying
parkfly27
79 views
Flying Jim's SHAFT 25 "trainer" from stevens aeromodel. For being a trainer, it does 3D very well. This was my first flight ever with this airplane, and i managed to get so...
Advertisement
About parkfly27's channel
more
less
Play all(22)