omega776's channel

Tablet-News.com unboxes the Evolio Evotab 2 Romanian tablet. It has a 7 inch display, a 1GHz CPU and a price of less than $200.

Review of the Lighted Cover for the Amazon Kindle Touch.

MSRP: $59.99

Links:

Kindle (Standard) Lighted Cover: http://goo.gl/Ruype

Kindle (Touch)...

Built a second tricopter using the controller from KKMulticopter. Very easy setup and clean install. No special configurations in the transmitter n...

Le 2º vol du LéO 213 de Roland Benoit lors du meeting Dax 2010.

Si quieres ver más vídeos de los Nao, visita el canal Robotic Intelligence Laboratory @ UJI donde encontrarás bailes, monólogos y mucho más.

El ca...

You might not be able to become a balancing expert, but with i Tour Seoul to guide you, you can become an expert of Seoul!

Visit http://www.visits...

This is an ambilight clone that I put together using an Arduino Duemilanove after seeing a tutorial by LadyAda (see below for link).

The lights on...

Homemade Ambilight clone usind an Arduino. Boblight is used to send color data from the PC via serial, 2 metres of dealextreme LED strips are used ...

Real transformer - rare!!!

Hobby King D4023-850, 108 gram, 850 Kv, motor tested with APC TE 14 x 10 prop at 4S LiPO voltages (using 5S A123 pack). Looks to be a good 400 to ...

Primeiro video de teste de motor da Aerocoelho, pretendo fazer outros teste, mas como vocês viram preciso melhorar minha bancada de teste e pra iss...

Working on new Character Animations, I tried to be more photorealistic. Animated & rendered in Cinema4D.

Mainboard: KKMultiCopter Flight Controller v0.2 (Korean)

Firmware: XCopter V1.0 (Recommend for a propeller guards)

Pilot: Hyunil Ko

http://www.kk...

kkMultiCopter - Y4Copter

http://www.kkmulticopter.kr

2011.02.08

Part 1 of E-fest 2011 flying review

Try this with your Heli or plane. Demo of Stability and agility for FPV Fun Custom PID settings make this fly amazing

crisp and stable, extreme A...

Some images of the vapor case for iPhone.

Самодельный корпус с RGB подсветкой

my first setup gaming system.

Sunbeamtech arcrylic UFO cube case,

msi main board 770,

AMD phenom9tm0 II x4 965 Processor 3.4Ghz,

Radeon HD4850,

Kin...

It only turns on once.............Check out my channel for more useless stuff!

Do not PM me asking me how to make this! Chances are, if you do no...

http://supavid.com/ - more funny vids

cameraman: http://www.youtube.com/user...

sound editor: http://www.youtube.com/user...

Make a mysterious electronic switch that only you know how to light up!

For more great projects: http://www.makezine.com

Subscribe to Make Magazine...

This is a visual metaphor of your hard-earned tax dollars at work...

Purchase a Useless Machine or Kit: http://frivolousengineering......

model: newbee

engine: Super Tigre 4cc

prop: 9/6

fuel: Tornado 10%nitro

WS 100cm

RTF 1450g

A lot of ppl dont read the description....and they're always like....woooow u must be so cool and awesome to be able to make all that. Lets me conf...

Download the template here (it's free!): http://www.peterdahmen.de/p...

All artwork made by Peter Dahmen.

Music composed by Scott Jo...

This is the 3x3x3 LED Cube I prototyped off the bread board in an earlier video (See link). Now it's all soldered together. Again, built while foll...

LED Cube with accellerometer it goes where you tell it to. This will be updated soon with additional features.

One small mistake. Big Consequences. Happy ending.

This Quadcopter uses an ARM7 as the main microcontroller that performs all PID calculations. Control is achieved by interfacing the microcontroller...

MK v2.0 ME Mikrokopter AUTOLEVEL

It's the most brutal bike you'll ever see...

Here is a hoverboard, hovering in my room. I made this with After Effects for a school project.

My website: www.haroldmethven.com

Reviewed at http://www.rcmania.com/revi...

CROCOPTER- a 6 ROTORS MULTICOPTER . Software and hardware developed and build in Croatia. Only one person work ! Onbord 486 computer, 3 x fast g...

demo flight at 1°C + GoPro HD + testing out the FPV equipment (1.3 Ghz 800mW)

Ideal for smaller projects (less than 12" x 12"), this is the easiest process for creating parts, patterns, tools, & molds. We demonstrate creating...

First flight with my GoPro attached, nervous moments but it worked, will need larger props (11x4.7 SF) and to play with the eagletree to see what m...

TERMINATOR 3 making - ターミネーター3 メーキング

Some tricopters that i have built in the last few months.

Multicopter shop look: http://www.quadframe.com/

This is our first of many cool FPV videos to come. I loved flying near 'The Trestle' bridge in Keilor it was just EPIC !

I plan to release a full v...

RC Hunter Killer with IMU from armokopter project. Thx Hans for this fantastic IMU that made this VTOL machine possible.

Gaui mid air filmed with Tricopter KK

Tricopter Build

10x faster video of a KK being assembled :)

This is my old "signguy" design tricopter with my new CC board from Open Pilot. If you haven't heard of them yet, check out openpilot.org, it's an ...

With the the stabilization all tweaked and tuned, this thing flies absolutely perfect! It just doesn't get any better than this. :) This video show...