nhop2005's channel

Good helpful vid... Been thinking about a lube sizer because pan lubing is ok but, tumble lubing can be a mess. Are the dies sold with the lube sizer? If not, is the price for the dies comparable to Lee sizer dies?

Fabio, the rifle may be full of cosmoline from shipping and storage. Take it apart, clean and lube it, then it should be good to go. As others have said you have to clean the bore with hot water or windex after shooting to get rid of the salts left over from the corrosive primers.

I am trying ...

Good Vid, the Lee Classic cast you mentioned is a great press for all types of rifle and pistol. Very sturdy and strong.

Good Video. One question, is there a lot of cleanup when your done shooting BP and how do you clean your rifle before you put it away? Thanks.

Nice setup... How did you attach the strings to the hanging wood blocks? I want to add a steel gong to our 100 yard range but here in Ontario all steel must be enclosed on 3 sides and top in a bunker. I am thinking about trying wood blocks for now to get around building the bunker for the ste...

I also load the Lee 1oz slugs and Lee cast .690 round balls. For the 1 oz slugs I am using the HS-6 Data and loading slightly below max (34 grains) in a Western Wad with two 7/8" punched from pizza box under shot cards between the wad and the slug. For the most part, the load has been pretty ac...

Good video, I use the same puller to take apart 7.62X39 surplus and reload the powder less 10% in a brass case with a cast bullet. Doing this I get two more rounds per 20 round box of surplus. Then I save the jacketed bullets for use later in my SKS or .303 Brit. It saves me from using the cor...

Good Vid, I wonder if this is Norincos version of a glock 17? Looking at the video, it kinda reminded me of a glock.

Good Vid man,

I have had one .38sp case get stuck in the RCBS resizer die. I got it out by taking the lock nut off of the expander and turning it all the way in with a cordless drill and flat head screwdriver bit. as the expander was screwed down it pushed the case out at the same time. After ...

Hi Scott, I picked up a Baikal in 7.62X39 and was wondering if you scoped yours and waht you used for a mount? With the receiver being so short, an airgun mount was suggested to me. Another thing, what did you use to hold down the front site lock spring so you could turn the screw up or down? ...

Great points Jeff,

We have quite a few more limits on firearms here in Canada than you do in the us but the mesage is the same. There are always anti gun peope wanting to take our guns away so it is up to the owners not to give them a reason.

Good video Pete, I was wondering about that, just got a bunch of old 9mm ammo from an estate. Even a box of HPs with the price of 4.99 written on it. Here in Canada, that has to be from the 70s.