nevrenufhp's channel
Loading...
59
subscribers
317,314
video views
Uploaded videos
1-10 of 24-
Ford 300, 274 cam, straight pipe
nevrenufhp
879 views
Just for fun I took off the mufflers, and welded in some pipe in their place. It's got Hedman header, to dual 2" pipes, then after the point of mufflers it necks down to 1....
-
Ford 300, open header, 274 cam lope
nevrenufhp
2,099 views
Open header and choppy idle. The cam specs: 274*advertised duration, 224 at .050 lift, 110 lobe separation, and .518 lift with the GM 292 rockers. Everything else is stock ...
-
Ford 6.6 (401) start & rev up
nevrenufhp
4,201 views
Not really the first start. I had to crank & bleed it yesterday to get it ready to fire up. It would have started with less cranking if I had the fuel system fully primed. ...
-
Ford 6.6 timing at 19
nevrenufhp
1,212 views
Testing out after advancing the timing to 19, from 15. Pretty snappy response. I only had 1 battery to start it, so it was a little slow cranking.
-
Ford F100, 300, new lopey cam
nevrenufhp
7,161 views
Just put in the new cam last week. Sounds pretty lopey for a 6. It's a 274* adv duration, and .518"lift with the GM 292 rockers(.474 with stock 300 rockers). Power range i...
-
DT466 straight pipe and tach
nevrenufhp
1,402 views
Rev up, listening to the pipeage, and hitting 3150rpm(stock is 2750).
-
Advance timing on dt466
nevrenufhp
7,639 views
how to advance timing on older dt466. Also use on DT360, Ford 6.6 & 7.8
More info on my Low Buck Diesel Power site, it's all about how-to.
-
how to tighten gov springs on BoschMW on DT466
nevrenufhp
5,492 views
Gain more rpm by adjusting the governor springs. This covers DT360, DT466, Ford 6.6 & 7.8, and others from 84-92(give or take)
If you go more than 4 clicks, it'll just tak...
-
Bosch MW pump fuel rate adjustment (DT360, DT466, Ford 6.6 & 7.8, and a few others)
nevrenufhp
16,364 views
How to adjust fuel rate (turn up the pump)on the popular Med Duty diesels. Roughly covers 84-92s. More info on my site, the Low Buck Diesel Power how-to site. The link is i...
-
89 F700, 7.8 engine walk around
nevrenufhp
4,384 views
Showing highlights of a Ford/ New Holland 7.8 liter
Advertisement
Play all(24)