munnsey's channel
Loading...
35
subscribers
255,618
video views
Uploaded videos
1-10 of 27-
PocketRocket's - MBC Manual Turbo Boost Controller
munnsey
196 views
This video shows the sealing ability of my MBC when pressure (boost) and vacuum is applied.
Valve in video is adjusted to open at just over 10psi, you can see that it hol...
-
Nathan Munns' Daihatsu Charade GTti Project 17/7/2011
munnsey
467 views
Just a quick clip showing where I am now with the project. Still much to do but all the long time consuming jobs have been done.
-
Ian's Daihatsu Charade GTti , Straight through front side exhaust
munnsey
2,294 views
Ian's Daihatsu Charade GTti, Featuring a front side exit exhaust.
Just a 2.5" pipe from turbo to the front bumper, no silencer.
Ultra loud, but minimal backpressure of...
-
Charade GTti Front brake caliper reconditioned, super slick free sliders
munnsey
859 views
This shows how free the brake caliper sliders should be. The slider pin shoudl be smooth and polished, and inside the rubber boot there should be a small amount of lubrican...
-
Superlight 3.2kg JUN Flywheel Balancing - Daihatsu Charade GTti
munnsey
1,828 views
Here is my Superlight JUN Flywheel on the balancer (first spin), Worked on by Paolo Speziani. The balancer is also Paolo's own work.
This ultra rare JUN flywheel is the ...
-
MAP Sensor and Fuel Cut Defender FCD, GTti Turbo Tutorial 2
munnsey
3,582 views
With a FCD (FUEL CUT DEFENDER) connected up to the MAP sensor, this clip shows how the MAP sensor output voltage is clamped by the FCD and will not go rise higher than 4.2v...
-
UNDERSTANDING THE VEHICLE MAP SENSOR TUTORIAL 1, GTti, TURBO, FCD's
munnsey
19,963 views
A video clip i put together showing how engine boost pressure and vacuum is sent by the M.A.P. (MANIFOLD ABSOLUTE PRESSURE) sensor to the ECU. The M.A.P. sensor converts en...
-
Daihatsu Charade GTti / GTxx Multi Layer Steel Head gasket
munnsey
1,928 views
Nathan Munns' MLS head gasket for the CB70 / CB80 engine. Designed to handle big boost pressures without blowing out. 3 layer stainless spring steel, Same thickness as OEM ...
-
Daihatsu GTti Project - Burning off sound deadening
munnsey
3,042 views
Not a nice job but worthwhile as there is loads of weight to be removed by burning off the tar based sound deadening.
Got there in the end, see my video of progress, searc...
-
1 litre Daihatsu GTti keeping up with a Porsche!
munnsey
8,421 views
Ian's GTti.
Advertisement
About munnsey's channel
more
less
Play all(27)