Uploaded videos
1-10 of 53-
Fixing HP7280 Printer Capacitors & error messages_Part 2 of 2
mrsillyman
45 views
see part 1 of 2 for the details
Also, this video shows the results of repeated cleaning cycles of the cartridges which ultimately cleared a dirty or blocked print head i...
-
Fixing HP7280 Printer Capacitors & error messages_Part 1 of 2
mrsillyman
58 views
I have a 3 in 1 printer that started to lock up every week or two, then every day or two, then it stopped working totally. Each time it would flash error codes on the scre...
-
Toro 4 TB525CS Cycle Weed Trimmer Lacks Power and Shakes
mrsillyman
38 views
2 year old Toro weed trimmer, valves adjusted, fresh gas, warmed up, runs OK under no load (picks up revs quickly). However, under load, the curved part of the shaft vibrat...
-
Concrete Cutter Floor Saw For Sale
mrsillyman
45 views
This video is posted for anyone who is local and may want to buy my 16" floor saw.
-
Ingersol Rand 2135 TiMax vs Campbell Hausfield_PL250 Air Impact Wrench
mrsillyman
845 views
In this video I compare the similarities and differences between 2 high end impact wrenches. Campbell Hausfield is a "lesser" brand name than Ingersoll Rand but as you wil...
-
Air Compressor Comparison_2Stage vs Single Stage
mrsillyman
379 views
In this rambling video I show you many differences between an industrial 2 stage versus a high end residential single stage compressor. So many people get confused thinkin...
-
Poor Mans Alignment Technique Part 2 of 2
mrsillyman
75 views
Hi folks... short video showing how the tire looked after painting the surface that contacted the road. I don't have an after picture but take my word for it that I checke...
-
Inner Tie Rod End and Poor Mans Alignment Technique
mrsillyman
200 views
I changed the inner tie rod on my 2001 Chev Tahoe and described a method to make sure that alignment was maintained. I have heard of people using string pulled tight from ...
-
Troubleshooting GM ABS slow speed cut in issue_Part 2 of 2
mrsillyman
867 views
Part 2 of a 2 part video series: My 2001 Tahoe had an ABS cut in issue on clean dry pavement when at very slow speeds. I suspected a sensor issue and documented the proces...
-
Troubleshooting GM ABS slow speed cut in issue_Part 1 of 2
mrsillyman
1,209 views
Part 1 of a 2 part video series: My 2001 Tahoe had an ABS cut in issue on clean dry pavement when at very slow speeds. I suspected a sensor issue and documented the proces...
Advertisement










Play all(53)