-
1 week ago
CB radio talking many states away..Check it out 30Oct2011
CB
HiLandersPlace • 175 views
mralh03
commented:
-
3 weeks ago
CB Keying Box
Key box used for cb and ham radios when using a mixer with 1/4" outputs--interfaces to your radio. Lets you know RX/TX modes. Handy little die cast...
LunchboxMobile • 328 views
mralh03
commented:
Damn good idea, how availability of this item? Still working on cost?
-
3 weeks ago
Talking Ship On My Browning Golden Eagle Mark III
TheSpeedster2006 • 901 views
mralh03
commented:
Very cool shack! 73"s Tony
-
4 weeks ago
President Lincoln 10/11 meter radio
A view of my President Lincoln and a little tour of my messy Radio Shack.
VA3JOR • 134 views
mralh03
commented:
Very nice collection!
-
4 weeks ago
RFX175 POP.AVI
Skeletor's RFX175 after one day of use. It was working good, putting out 170 watts peak with good loud audio.
scott91372 • 1,063 views
mralh03
commented:
Danm!
-
1 month ago
Lafayette HE-20C CB Radio Vid 2 Repairs
Showing the progress of repairs and what is left to be done.
262NagantRadios • 61 views
mralh03
commented:
Very cool video Paul! 73"s Tony
-
1 month ago
STUDIO AUDIO ON THE CHEAP FOR CB RADIO
OK EVRYONE IF YOU WANT NICE CLEAN AUDIO THIS WILL DO IT FOR YOU. VERY SIMPLE SETUP EVEN EASIER WITH A 4 PIN RADIO AND AROUND 300 TO HAVE A SMOOTH S...
SNAKERADIOS • 862 views
mralh03
commented:
Really really cool idea, I have no problem saying I went to Ebay and did a bit of shopping. I want to have better audio. When I get to the mic connection im going to have to review this video. But it seems like its worth the effort. Thanks for posting the vid!
-
1 month ago
My CB base setup Pt. 2
Showing my current cb base setup
jon4ford • 1,771 views
mralh03
commented:
Cool collection
-
1 month ago
EL RAPIDO DX CON MARGARITO DESDE JALISCO MEXICO
ECHANDO LA BUENA RR POR RADIO CB 11 METROS 27.695 LSB Y ME ENCONTRE A MARGARITO DE JALISCO MEXICO Y ECHAMOS UNA BUENA PLATICA YO EN MI PORTABLE 18...
RAPIDOCARACOL017 • 1,453 views
mralh03
commented:
Very cool DX!
-
1 month ago
CB RADIO SNAKE RADIO CUSTOMS NEW SHOP SETUP
OK FOLKS I REDID THE SHOP AGAIN IT WAS NOT FUNCTIONAL NOW IT IS
SNAKERADIOS • 354 views
mralh03
commented:
Cool set up!
-
1 month ago
Stryker 955 hp ssb
This video was uploaded from an Android phone.
littlejoe371 • 1,393 views
mralh03
commented:
That sure is a sweet looking radio. I have the 490 and It has great audio & receive & a cool looking American flag on it too. Any idea when they are going to start selling the 995?
-
1 month ago
Sirio Gain Master Final Review Video.......Bands Covered and Feeder Losses
This is the fourth and final video of the new Sirio Gaimaster Preview/Review. A few Guys of the various radio forums asked if the Sirio was uesable...
m0ogy • 3,916 views
mralh03
commented:
Dave Hello! Its me again Tony, question? Have you heard of anybody feeding a few more watts than Sirios recommended constant input of 500 watts into the SGM? Im going to purchase an amp in time and I was wondering how sensitive the SGM is to wattage? Maybe It couldnt handle the rated Sirio wattag...
-
1 month ago
CRYSTAL SCANNERS
Challenger talks about old time crystal scanners and gives a shout to Cobraman and Titanic.
TheLASERJAW • 133 views
mralh03
commented:
Another great video!
-
1 month ago
Lafayette HE-20C Vid 1 CB Radio
This video is the easy one. It shows the general current working state and a walk through of the insides of the radio and the preamp/compressor. Th...
262NagantRadios • 77 views
mralh03
commented:
Cool video Paul!!! Cant wait for the next for the next one! 73's Tony
-
1 month ago
Sirio SY 27 3 Element Beam...17AU59363/15/2011
Sirio SY 27-3 Element Beam, Radio Shack Rotator Motor
10feet high.
17AU5936 • 1,392 views
mralh03
commented:
Very impresive set up, simple and very efective-I like it! Sirio makes good antennas no doubt about it. I was thinking about getting a Sirio 3 element like yours but everyone I talked to said you need a tower, guy wire, a lot of coax. I wish I had seen this 2 months ago I would have the same set-...
-
1 month ago
Religious Broadcast QRM on 27.555 MHz AM Part 2
Jan 20th, 2012. Not sure if it this is CADS, WPAS (Community Audio UK, Irish Churches on 11 meters, etc) or something else. Could just be somebod...
R4002 • 92 views
mralh03
commented:
You have tested so many antennas. Which is your own personal favorite for your auto or home? At this point in time that is. Thanks 73's Tony
-
1 month ago
Junk - Future Project videos & Ramblings......
Showing one old rig I'm going to do a repair/restro video of and many radios that I'm considering doing the same with someday.
262NagantRadios • 77 views
mralh03
commented:
Paul, keep up the good work. I have enjoyed your past video & I look forward to future videos. Take care & Happy New Year to you too ! 73's Tony
-
1 month ago
2020 Livewire.... 357JN, 351Fl.
Really enjoyed the chat my friend and I am glad that mother nature held long enough to have it!!
Mr343Turbo • 80 views
mralh03
commented:
MAN ! What a bee hive ! Very cool collection of gates Mr343Turbo. I really enjoy them and maybe when I get my station dialed in I can make the trip to your receiver (if MOTHER NATURE lets me). Keep up the great work-the 562 said that,73's Tony.
-
1 month ago
ROBYN T-240D EB5DQH
This is my 1977 Robyn T-240D 40 channels tube radio with the Astatic base microphone! Enjoy
ferdy1972 • 68 views
mralh03
commented:
Thank you for the reply, Im considering purchasing the yellow model. I have seen a few on ebay, if I was to purchase one It would be My first tube radio. Thanks again 73's Tony.
-
1 month ago
West Coast DX & BIG Heater Reveal!
I was on 38 LSB today November 6, 2010. DX was coming in form the west coast. World Radio 257 in Washington was commonly heard. Mobile in San Diego...
BLUZUMR • 3,435 views
mralh03
commented:
Now that is FUNNY! So you have great radios, LMR 400- great coax. but what base antenna do you use?
-
1 month ago
How to Solder
Popular Mechanics senior automotive editor Mike Allen demonstrates the fundementals of soldering a wire together. It's a lot easier than you think....
popmechshow • 164,128 views
mralh03
commented:
Angry solder man, very angry. I think that his turtle neck was too tight around his neck.
-
1 month ago
MR PSI 1731HP Dyno run at VIC Supercruz
Check out our website http://www.hpheaven.com.au
Lyle Lemon's MR PSI personal best with 1731.7HP Dyno run at VIC Supercruz.
To download this clip ...
hpheaven • 1,806,439 views
mralh03
commented:
How fast does that equal?
-
1 month ago
Part 1: CB Radio Channel 17 Jingle (in Skipland)
Quite often lately, I've been hearing a mystery signal when the DX (skip) rolls in on 11 meters (CB radio). It is a very strong signal here in Nort...
aa9g1 • 99 views
mralh03
commented:
Strange ?
-
1 month ago
Ole' Grampa and 4040 comparing the Marconi4x to the Sirio Gain Master
Ole' Grampa doesn't mean to say that all you guys on the Internet radio forums are Parrots and Peckerwoods, I'm really referring to the "One liners...
Marconi390 • 216 views
mralh03
commented:
Cool video, and thanks for all the time & effort. In the end that Gain Master does kick some ASS! 73 s Tony
-
1 month ago
Jesse James 854 Texas Mobile!
Jesse, jesse, jesse and more Jesse James 854 in Dallas Texas! He makes a good trip to Maine in his mobiles. A few times we have made the contact mo...
BLUZUMR • 337 views
mralh03
commented:
OUCH! It seems more like Jesse ripped Quikdraws lips off!Cool set up, I really like the twin speaker set up for the raptor!
-
2 months ago
Uniden Washington CB Radio AM SSB Base Station President
Short video of my stock late model Uniden Washington receiving 38 LSB DX.
262NagantRadios • 863 views
mralh03
commented:
Cool, thanks for the quick reply Paul! Theres a ham radio shop down the road from me and im on my way down there as soon as I press the Post button. Thanks again and 73's-Tony
-
2 months ago
SOUNDING GOOD
Do you sound good in my radio? I hope so.
TheLASERJAW • 116 views
mralh03
commented:
Another great video, keep em comeing Dino! That is if you have the time. It is kind of weird when soumeone tells you your radio sounds good or like crap when you didnt even ask for their opinion. Anyway,thanks again , happy new year - 73's Tony
Very cool video!