mostafaelnemr's channel

This is a demonstration of the 4'x8' version of the blackToe CNC Machine (Router). This version is using roller chain as the method of power trans...

A NOVEL NEW BICYCLE DRIVE

A new bicycle drive is presented with significant advantages over conventional chain drives. The drive is

described in th...

Final steps in cutting a very ornate bathroom vent cover out of 0.070" thick steel.

I proudly want to present you my plasma router.

It´s not yet completely finished.

The router is belt driven by stepper motors.

The controller is ...

Recorded on March 7, 2011 using a Flip Video camera.

Precision Plasma CNC table cutting an ornamental grate. 16 gage steel at 150ipm. Rapid speed is 1000ipm and acceleration is 50 in/sec/sec. Visit ...

SolidWorks animation of how I built my home made CNC. I didn't draw the spindle and the electronical parts that are inside the case. I suppose I'll...

Paul the robot drawing Patrick at tenderpixel gallery, London. Paul the robot is part of Patrick Tresset's exhibition at tenderpixel in central Lon...

Тест новых шаговых двигателей PL57H76-3.0-4

My new custom made CNC router, not fully completed yet. Full Aluminium parts, 2Nm step motors [will be there soon ;-) ]

part 2 - episode 108

------------------------

Ricardo Alamo, Daniela Alvarado, ...

ireland

we produce tomato under hydroponic greenhouse condition. This greenhouse install on a geotermic area for heating. Growing Gutter, automation, fans...

Schmeckhafte Tasty Tom Tomaten von Vereijken Kwekerijen in die Niederlande. Top Produkte aus Greenport Holland Floriade

operating the towable backhoe efficiently, towable backhoe digging, how to operate a towable backhoe, digging dirt, home made digger, how to build ...

working with modified shoe.

Who have original size of this model pls reply.

(( rubber track 130x72x29 ))

Cutting a Bevel Gear on my cnc Mill Optimum bf20L . The sound you can hear is from a broken Gear on my mills spindle.

My first CNC plasma cutter/profile cutter that can cut up to 3/4" plate and 7/8" steel plate with an edge start.

It uses a Hypertherm 1250 with up ...

The low-cost eTrack linear stages are designed for a variety of applications in research & development, automation, and other industrial areas requ...

First step to building a working cnc mill is to have an accurate representation in a CAD/CAM software. The progress/plans can be viewed at http://...

Wallpaper: https://picasaweb.google.co...

Rendered animation of a helicopter rotor's kinematic analys...

This is a simple construction of a pipe bender. This is for a certain pipe diameter with a certain curve radius. For other specs, the handle assemb...

!THINK SAFETY and DONT POINT AT PEOPLE!

USE EYE, EAR AND HAND PROTECTION.

This is a test of my 160 mm to 75 mm pp potato cannon some time ago. the...

My first airgun I built 3 years ago. Caliber is .22 and is built using the book by H.M. Buckley "Modern Pneumatic Airgun".

immagini cartoni cn la splendida colonna sonora dei lifehouse you and my

S-61 Sea King Helicopter Rotor Head Animation;Made by Karel Kinable "Fozzy" 40 Sqn Koksijde Airbase Belgian Air Force;4 different camera views; Air...

حسبي الله ونعم الوكيل

My first moving robot.

This is the spider robots "organs". I just placed (taped :P) it all on a piece of cardboard to test if my programming and el...

This is a tool Duane inherited from his dad. It is an electric hacksaw.

here's the power hacksaw of my friend

engine: 127W, 120 rmp, 10,7 Nm

hacksawblade about 150mm /6"

cuts on the backstroke

eigenbau mechanische mo...

Demonstration on Gear Cutting part5

Cutting a 18 teeth gear using a Sherline Mill with rotary table

Thanks to Shorty (Hobbynut) for his videos on gears !

Home made gear cutting hobs on my sherline part 6

Making home made gear cutting hobs on my sherline

Demonstration of making home made gear cutting hobs, on my sherline part 4

Cutting a 13 tooth gear for my Webster engine.

Make your own involute gear cutters. These will be used to make a pair of bevel gears.

Casting the pattern made in part 15. The recessed rectangle at the top will be cut out later and is filled in to aid moulding.

Full details of making a wooden pattern for a greensand mould.

Part 16 will show the casting being poured.

How I machined the casting I made. This is a large casting for my machines so some unusual set ups were used. You can see the casting being made in...