mikeamato100's channel

@mattrlaeno Calaveras county frog jump or jumping frog jubilee or whatever its called. Its the Calaveras County fair in california.

Stupid simple great idea. Sure would make it easier not having to pick everything up again and again.

@Hduceduce Give them a place to race? Do it legally on private property, idiot.

I have to agree the 362 is a joke. When using it it feels like the size and weight of a 440 but without the power. Biggest disapointment ever with a new saw.

That was great! I have wanted to do that to so many of those piece of crap washers. Samsung built that for Maytag, that one of the biggest reasons its such a piece of crap.

I have a 8 year old ms170 and its been great. Its funny because I've got an 028, 044, 357xp and a 372xp and the 170 is the first saw I grab if what i'm cutting is under 10 inches. Its very nice how light it is so you can use it all day and not get tired. Mine has had fairly heavy use over the yea...

Not as impressive as it looks because the weight is bearly moving

@Love44Rocketz Its Mark Chessnut

I have to laugh at these videos of people compaining of frosting issues with these bottom freezers. All they do is blame the manufacturer, the service company, the warranty company or whatever.

Read this: There is not a problem with the refrigerator. THIS CAN ONLY HAPPEN IF YOU LEFT THE FREEZER D...

As a business owner who is very conscientious about how effective my spent advertising dollars are, I can say with 100% certainy that Yellowbook is the biggest waste of money out there for an advertiser in the book. So I hate Yellowbook too but for other reasons that you do. With that said, I ...

Another thing for anyone watching this, its not a good idea to let the dispenser face panel hang by the ribbon as they can be somewhat delicate. Gently grab it where it attaches to the control board (not the one on the face panel, the one mounted to the door) and simply pull it out. When reinstal...

It didn't come from the factory like that. Thats not a sealant or any type of "bondo", its actually melted plastic. Most of the newer pumps I replace for leaking look like that. I havn't cut one open to see what the cause it, but its from something rubbing on the plastic housing which melts it. I...

For the grates on the range, the only way you will get them flat is if you take them to a machine shop and have them run them across the surfacer. They look cool too after its done with the top machined.

Thats the crappiest washer to ever wear the Maytag name. The original Neptunes had a few bugs in them but the 4000 series that came out in 1999 wasn't too bad after the PHA kit was factory installed. The later 5500/6500 machines made in the 2000 to 2006ish era were great. That one you have is bu...

Its not a Whirlpool. That washer was built back when Amana was doing their own thing. You just need new brake pads. They cost about $20 and are easy enough to change if your hand can work in cramped areas. The front two pads are right there where you can see them but the back one is a little diff...

It doesn't matter what you get these days, everything has its share of problems. That washer is not all that bad but it does have a few issues as with everything else new. One common problem with the Duet, and what I think your problem was, is the plugs on the controler. They don't make a very g...

@DrZarkloff Ohm out the evaporaor thermistor at the plug-in on the board before replacing the board as that will cause the unit to not defrost if the thermistor fails. 98% of the time it will be a board if the heater and related wiring is OK, but that other 2% of the time a $150 part was wasted ...

Its not a design flaw. This problem can ONLY happen if an abnormal ammount of humidity is being introduced in to the refrigerator. Period. 99% of the time that abnormal ammount of humidity is because you unintentionally left the refrigerator door ajar. Either because you didn't close it all the w...