mike2768's channel
Loading...
24
subscribers
37,120
video views
Uploaded videos
1-10 of 10-
Homemade cnc router/plasma table
mike2768
154 views
This short little video is my machine cutting out a new router mount from .750" delrin plastic. This plastic is very strong and machines very well.
-
Cnc plasma cutter using LOTOS LTP5000 cutter
mike2768
1,599 views
Well here's the first two parts cut. They are .125" steel cut at 55ipm and at 50amps. They turned out awesome.
-
Cnc plasma/router
mike2768
344 views
This is a little video of the machine I've been building. It's running a little cut program of two brackets.
-
Cnc plasma/router
mike2768
324 views
First test of one axis of my Cnc plasma/ router I've been building. I was very impressed with how well it runs at 1500 ipm. I did run it at the max of 2200 ipm just to try ...
-
Small Vacuum Table
mike2768
17,778 views
Here's a video show my machine cutting a vacuum hold down table. I used MDF wood because this is only a sample cut to make sure the G code is good and to see if any changes...
-
cnc router with Xbox control.mov
mike2768
3,751 views
diy cnc router using a Xbox 360 control pad to jog machine.
-
CNC router picture 20x24.mov
mike2768
1,321 views
This is a short video of my 20x24 desktop cnc router. It's not the greatest video. Feed rate is only 5 ipm the rapids are 160ipm. The slow feed rate is because of the sherl...
-
frist run CNC machine.mov
mike2768
380 views
sorry video is a little dark, but you can see ok.
-
Mike's D1/DM
mike2768
2,139 views
BZM 40cc 3 port topend with polini bottom end, Polini reed cage, phbg 18mm carb, Blue polini reeds, stock polini crank
-
Mikes BMS Finished.
mike2768
9,330 views
The bike is all ready for a summer of racing here in Ontario, Canada
Well this past year was great racing this bike. I won the AMA 40cc open series for the summer. Check ...
Advertisement
About mike2768's channel
more
less
Play all(10)