mig29jette's channel

You may remember this watch from 'Possible broken mainspring' and 'Installing a to small crystal'. Now I disassemble it for cleaning and oiling. ...

Another scrapped wrist watch bought at the jewelers. 17 jewels, bumper automatic movement. I think it needs a new second hand. Will have to get ...

Patented in 1941 by Milton Campbell the Watch-Craft Tri-Duty is the Grail of Staking Sets. Operating with a larger die plate than any other set in ...

All rights reserved to South Korean Educational Broadcasting System TV.

Safety pinion on Illinois hunter case pocket watch. What and where a safety pinion is on a pocket watch and how it works. Pocket watch is 7 jewels.

First time using the K&D balance staff remover No. 50 B with No. 18 staking set. Illinois 16 size, A. Lincoln, 21 jewels. Lower pivot of staff ...

Service tip on wrist or pocket watch balance staff removal. Expert lesson free.

This is detailed instructions on how I install a balance on a pocket watch movement. When I do an assembly video I sometimes don't explain fully w...

YOU MUST REMOVE THE HAIRSPRING AND ALL ROLLERS BEFORE USING. I made this video because the video I will use this in did not show this tool well. ...

Watch did not run. When I wound it up I felt no resistance from the mainspring. I figured it must be a broken mainspring. I was surprised to fin...

Staking Set No 18, Inverto, by Kendrick and Davis, Lebanon N.H., PAT. April 7, 25. Made this video awhile ago but used staking tool in a recent vi...

The Glashütter balance-staff is a simple, tapered staff. That suggests a rapid replacement. It is fool's gold!

Die Glashütter Unruhwelle ist eine e...

carlos baute y marta sanchez - colgando en tus manos carlos baute y marta sanchez - colgando en tus manos carlos baute y marta sanchez - colgando e...

From the movie soundtrack of "I Am Sam".

Thanks to AssaraxDemyx14 for the idea. This is the procedure I used for making watch hand removers. This type I call pry bar hand removers. Base...

Better than the other video I did and still for nothing. This stem is held in by a spring loaded push button. For screw type see http://www.youtu...

Things to know if you go this route,,

it may take time to get warranty parts when purchasing a unit online so it's good to have an emergency back...

I disassemble a Hamilton 992 pocket watch. This is how to take it apart for repairs or fix. Had to do it in two parts cause I explain too much, s...

Install or replace mainspring on pocket watch with mainspring winder. Catalog number of mainspring is 318. Don't forget to oil the mainspring. I...