michael2nicolaisen's channel

michael2nicolaisen commented 3 hours ago

1:42 Add to

Norton Commando billet case

Norton Commando Billet engine case Programmed using "HyperMILL" machined on a DMU80 Monobloc at Trimac Machining.

1,748 views

michael2nicolaisen said:

Is the machine wider and/or longer with the 60 chain mag compared to the standard machine with 2x 16 disc mag?

• michael2nicolaisen commented 4 months ago

  1:42 Add to

  Norton Commando billet case

  Norton Commando Billet engine case Programmed using "HyperMILL" machined on a DMU80 Monobloc at Trimac Machining.

  1,748 views

  michael2nicolaisen said:

  Is this DMU with the 60 pocket chain magazine?

+ View allshow less

michael2nicolaisen commented 3 months ago

2:11 Add to

Dynamisk fräsning - Haas DT-1.mpg

Dynamisk Fräsning gjord i Mastercam X5. Bearbetad i HAAS DT-1 med BT-30 kona

585 views

michael2nicolaisen said:

Is the first tool a R215.36-08050-AC19L or a R215.36-08060-AC19L?

• 1:01 Add to

  DMG DMU50-Edgecam 2011 R1-Frez1.mp4

  Frezowanie konika szachowego na maszynie DMG DMU 50 Eco z układem sterowania Sinumeric z wykorzystaniem programu Edgecam 2011 R1 i narzędzi skrawaj...

  731 views

  michael2nicolaisen said:

  Do you have a fully working edgecam postprocessor for this machine?

• 1:57 Add to

  5x Milling of a Motorcycle Engine Inlet

  For more please visit:

  WWW.MYGROWTECH.COM

  80 views

  michael2nicolaisen said:

  You just don't buy a 400k+ $ Hermle C40U and then puts an old Kurt vice on the table.

+ 2 more videosshow less

michael2nicolaisen commented 4 months ago

6:12 Add to

4th AXIS IMACHINING.MOV

4th-axis machining using SolidCAM imachining technology.

MACHINE: DAEWOO DMV 40/20

TOOL: 1/2" IMCO POW-R-FEED ENDMILL

MATERIAL: 4140 HT

598 views

michael2nicolaisen said:

I'll bett your Y-axis isn't moving at all, making this 3-axis simultaneous only :-)

• 12:14 Add to

  Rohdaten Fräsversuch iMachining

  811 views

  michael2nicolaisen said:

  Is there Heidenhain or Mitsubishi controller on this machine? What is the acceleration of the X and Y axis?

+ One more videoshow less

michael2nicolaisen commented 6 months ago

5:53 Add to

SwiftCARB Rampmill machines 6061 aluminum at 200 in3 MRR on Fidia with Truemill LONG VERSION

This is roughing 6061 aluminum on a Fidia machining center with Truemill programming. Here are the Specs:

MRR (material removal rate): 200 Cubic I...

334 views

michael2nicolaisen said:

How many kW is the spindle? 55kW?

• 1:00 Add to

  Owowowowooo..... wonderfull Machine!!!!!!!!!!!

  Exhibition Centre nice 5th axis machine ...

  56,798 views

  michael2nicolaisen said:

  @Strothy2 DMU 60 duoBLOCK

• 0:28 Add to

  DMC75V Linear

  DMG all 5 axis linear drive, very cool 5axis machining demonstration. State of the art machining.

  7,490 views

  michael2nicolaisen said:

  State of the art machining?? No not at all. Work NC makes way to much C axis rotation. With a good cam system it would be possible to make a much smoother program.

• 7:46 Add to

  OPEN MIND hyperMAXX

  OPEN MIND hyperMAXX roughing in aluminium

  Material : Aluminium 6082T6

  Machine : Mikron HPM 1150U

  Tooling : Fraisa

  488 views

  michael2nicolaisen said:

  @OpenmindhyperMILLuk

  I'n not sure if we used airblast or MQL through the spindle. But I can check.

• 0:55 Add to

  OPEN MIND hyperMILL 5 Axis machining fitting on Matsurra

  hyperMILL is the easy to use, fully collision checked and collision avoided CAM system from Open Mind Technologies. One interface from 2D to 5 axis...

  1,615 views

  michael2nicolaisen said:

  This isn't a MAM72-25 but a LX-0 5AX.

+ 4 more videosshow less

michael2nicolaisen commented 7 months ago

4:01 Add to

Impeller machining on five axis StarragHeckert machiningcenter

The efficiency of radial compressor wheels depends to a high degree on the precision of the production process. This is something to which we are w...

216,445 views

michael2nicolaisen said:

@Starrag01 Is this PSI+ based on hyperMILL multiblade?

• michael2nicolaisen commented 7 months ago

  4:01 Add to

  Impeller machining on five axis StarragHeckert machiningcenter

  The efficiency of radial compressor wheels depends to a high degree on the precision of the production process. This is something to which we are w...

  216,445 views

  michael2nicolaisen said:

  Which cam system was used for programming this impeller?

+ View allshow less

michael2nicolaisen commented 9 months ago

4:05 Add to

Chrono watch -CNC CAD/CAM machining by Makino/Hitachi Tools/WorkNC

Chrono watch CNC machining with Makino machine, Hitachi tools, WorkNC CAD/CAM software.

Milling, roughing, finishing.

39,032 views

michael2nicolaisen said:

Which Makino model is it?

• 0:54 Add to

  FANUC 31i running HPCC Code Running

  Machining Center is running a complex medical part.

  2,037 views

  michael2nicolaisen said:

  Matsuura MX-520?

• 0:49 Add to

  NL2500 turning, high-speed camera

  10,681 views

  michael2nicolaisen said:

  @perxverso Yes it surely looks like a different insert with another type of chipbreaker.

• 1:06 Add to

  filmpje 4 DECKEL MAHO DMU 70 eVolution 5-Axis machining center

  filmpje 4 DECKEL MAHO DMU 70 eVolution 5-Axis machining center

  3,097 views

  michael2nicolaisen said:

  What is the diameter of the table?

+ 3 more videosshow less

michael2nicolaisen commented 11 months ago

8:58 Add to

CTX gamma 2000 TC

The CTX gamma 2000 TC with powerful turning and milling spindles and torque motor in the B-axis allows heavy and sophisticated complete machining. ...

72,866 views

michael2nicolaisen said:

@cncit No casting isn't the same. Mori NT has "box in box" design and DCG ( twin ballscrew drive ) This one doesn't.

• michael2nicolaisen commented 11 months ago

  8:58 Add to

  CTX gamma 2000 TC

  The CTX gamma 2000 TC with powerful turning and milling spindles and torque motor in the B-axis allows heavy and sophisticated complete machining. ...

  72,866 views

  michael2nicolaisen said:

  @cncit I think only Alpha 450 TC and Delta line is re-badged Mori NT. The rest is Gildemeister.

+ View allshow less

michael2nicolaisen commented 1 year ago

47:55 Add to

Matsuura Maxia MX-520 5 Axis

The all new Matsuura Maxia MX-520 will be targetted at companies making the switch from 3 axis to 5 axis operations - a transition that Matsuura is...

3,833 views

michael2nicolaisen said:

It looks like a section of a cylinderhead.

• michael2nicolaisen liked 11 months ago

+ One more: Likedshow less