mh4617's channel

John Renwick and Ed Wallbank testing Epimetheus, the 1665cc Vincent, on the dynamometer. Nitrous oxide, air operated auto gear change, 7,000rpm and...

Vacuum (Flame eater) engine designed by Alexander Balabanov - Sep 2011

Cylinder 16 mm

Stroke 35 mm

Speed 860 rpm

Want U Back is released 19th February in the UK. Click here to buy your copy from iTunes now! http://bit.ly/xZq1w6

Music video by Cher Lloyd feat....

Riding with left hand

What a fantastic race from Monza, real edge of your seat stuff.

small diy adjustable turret on cross slide

This is one way to cut an internal keyway with a lathe. This is a good option if you need to make an internal keyway but do not have a broach set....

This is a 5" rotary table that clamps in my milling vise for milling curves, putting a radius on the end of a rod, etc. It's based loosely on a de...

http://www.smithy.com (see transcription of video below)

Learn about the basics of metal lathe operations using our Smithy Granite combo lathe/m...

This is a video of using a home made ball turning tool on a lathe. The basic design of this tool is provided on Steve Bedair's excellent website. ...

Drugi vžig.

Kako se razstavi 50cc dirkalnik :)

How to dismantle a 50cc race bike :)

http://www.apostol-engineer...

Easy to make with a few friends and things you can find in the barn!

http://www.permies.com I had this idea to build a rocket mass heater that was not cob. I wanted to see if a wood bench filled with sand would work...

http://www.permies.com

A compilation of 12 rocket mass heaters. 8 video clips of rocket mass heaters, 2 video clips of pocket rockets, 1 picture f...

This video explains the full process of rapid prototyping and casting technology offered by Prometal RCT.

This video covers from start to finish, ...

Motor feito por mim, em latão, aço inox, alumínio e madeira. Funciona com chama produzida por álcool.

http://www.mainsteam.co.uk A Machination of the Devil - ! Video showing a Flame Gulper (Flame Licker) hot air engine running, with a section in Slo...

www.motorradstarter.de

Damit ist jeder in der Lage sein " Schätzchen" selber zu starten !

Die tragbare Startmaschine ist 17kg leicht und mit 490x4...

The best Hassle free Race Bike starting system, Proudly made in New Zealand, Contact Roger, Road & Race Motorcycle Services ltd, Christchurch NZ. ...

We design, manufacture and install micro-hydropower turgo turbines.

We design, manufacture and install micro-hydropower turgo turbines.

http://www.smithy.com (see transcription of video below)

Learn about the basics of metal lathe operations using our Smithy Granite combo lathe/m...

łuparka mojego wykonania

top spaccalegna k3

GAS POWERED SCREW - WOOD SPLITTER. THANKS FOR THE HERMINATOR'S HELP!

Thank you everyone for the great responses and the support of my project.

Home made wood splitter, The inspiration came from You tube video's, What...

Retired Australian inventor Chas Campbell has designed and tested an overunity generator that allegedly creates enough energy to maintain itself, w...

A turbine i designed and made producing 8kva of free electric

Pumping jack, gear reduction and engine built by Cedric R.

This engine, with slight variations, is a model of RudyKouhoupt's "PIONEER".

It is a non-compression engine. When the crank has the piston at 6 de...

A challenging machining project for a machinist. This was the final engine Rudy designed and built before his untimely death in 2004.

motore rotativo a pistoni assiali 7 cilindri